MuseScoressa on käytettävissä paljon erilaisia tekstejä, kuten viivaston teksti, dynamiikka, tempo, sormitus, sanoitukset ym. Lisäksi tekstiä voi löytää viivoihin yhdistyneenä,—kuten maalit, oktaavinsiirrot, kitaran barreviivat jne.
This chapter covers some of the different classes of text available in MuseScore, and shows you how to format them. Other specific types of text are covered in other chapters:
To add a text-based element to the score, use one of the following general methods:
Every text-based element in the score has three levels of formatting:
To position a text object, use any of the following methods:
When you apply a text element to the score, its anchor position will depend on the type:
To enter Text edit mode use one of the following methods:
In this mode you can apply formatting to individual characters, including options such as Bold, Italic, font, font size, subscript and superscript. These are accessed from the Text toolbar below the document window:
To exit Text edit mode use one of the following:
In Text edit mode, the following keyboard shortcuts are available:
You can use the Special Characters window to insert quarter notes, fractions, and many other kinds of special symbols or characters into your text. A few symbols can also be accessed by shortcut (see below).
To open Special Characters, use any of the following methods:
Note: (1) This only works in Text edit mode; (2) The Special Characters dialog should not be confused with the menu item of the same name in the macOS version of MuseScore.
The dialog is divided into 3 tabs: Common symbols, musical symbols and unicode symbols. The musical and unicode tabs are further subdivided into alphabetically-arranged categories.
Double-clicking an item in the Special Characters dialog immediately adds it to the text where the cursor is positioned. Multiple items can be applied without closing the dialog box, and the user can even continue to type normally, delete characters, enter numerical character codes etc., with it open.
In Text edit mode the following keyboard shortcuts can be used to access certain special characters:
To edit text styles, use any of the following methods:
Note: Changes to a text style will affect all text that uses that style within a score.
To edit a text property (which has the same parameters as the text style):
Unlike changes to a text style, changes to text properties only apply to the single specific piece of text you right-clicked on. The text style for the rest of the score remains unchanged, and other text using the same style is unaffected.
During text editing you can make changes that depart from the basic style and may also differ from the specific text properties of a given piece of text. You can revert changes made through text editing (such as font size and italics) with the reset text to style option.
The available options are divided into categories:
Note: Opacity is set by the parameter "Alpha channel" in the colors dialog: a value between 0, transparent, and 255, opaque.
The distinction between system text and staff text matters for part extraction in ensemble scores. System text will extract to all parts. Staff text will only extract to the part to which it is anchored. For details, see Text.
This text style will be saved along with the score. It will not be available in other scores, unless you explicitly save the style sheet and load it with another score.
You can apply to either the score or part you are seeing, if you hit Apply and then OK.
If you are in one of the parts of your score, you also have the option to use the Apply to all parts button before OK, so you don't have to manipulate all parts individually.
If you have made changes to an individual piece of text and you want to return it to the defined text style for the score, or if you changed the style with an old version of MuseScore and you want the style to correspond to the default text style in MuseScore 2, you can use the Reset Text to Style option.
Select the text you want to reset to style and click on Reset Text to Style in the Inspector. If you need all text from a given style to be "reset", right-click on one, then from the context menu choose Select → All Similar Elements first.
Text styles (together with all other styles in a document) can be saved as a style file and loaded into other MuseScore files. See Save and load style.
For general-purpose text, use Staff Text or System Text. The difference between these two types of text is whether you want it to apply to a single staff, or the whole system. This matters when extracting parts: staff text will only appear in a part that contains the specific instrument the text is attached to, while system text will appear in all parts. Additionally, if you choose to hide empty staves, any staff text belonging to an empty staff will also be hidden. System text is never hidden by the "hide empty staves" feature.
Staff text is general purpose text associated with a particular staff at a particular location in the score. To create staff text, choose a location by selecting a note or rest and then use the menu option Add → Text → Staff Text, or use the shortcut Ctrl+T (Mac: ⌘+T). A small text box appears and you can immediately start typing. You can exit the text box at any time (even without typing anything) by pressing Esc.
Staff text can, for example, be used to apply indications such as "Solo" or "Pizzicato" to one staff in a score. Depending on what the instructions of the staff text are, MIDI playback of that staff at the text location can be altered to match the instructions by right-clicking on the staff text and selecting
Staff Text Properties…. See Mid-staff sound change.
System text is used when you wish to apply text indications to a whole system rather than just to one staff line. This makes a difference when extracting parts, or if you choose to hide empty staves. To create system text, chose a location by selecting a note or rest and then use the menu option Add → Text → System Text, or use the shortcut Ctrl+Shift+T (Mac: ⌘+Shift+T). A small text box appears and you can immediately start typing. You can exit the text box at any time (even without typing anything) by pressing Esc.
Aloittaaksesi Sointumerkkien lisäämisen partituuriisi, valitse ensin nuotti tai tauko ja paina Ctrl+K (Mac: ⌘+K). Tämä asemoi kursorin viivaston yläpuolelle, minkä jälkeen viivasto on valmis tietojen syöttöön.
Sointumerkintöjä voidaan syöttää ja muokata aivan kuten normaalia tekstiä. Korotukset (♯) ja alennukset (♭) syötetään seuraavanlaisesti:
Note: When you exit the chord symbol, the characters you have typed will automatically assume the correct format : a "#" or "b" will turn into a proper sharp (♯) or flat (♭) and so on. Do not try to use actual flat and sharp signs as MuseScore will not understand those properly.
After you have finished entering a chord symbol you can either:
The following commands are available for chord symbol entry:
An existing chord symbol can be edited just like ordinary text. See Text editing.
MuseScore understands most of the abbreviations used in chord symbols:
Note that for half-diminished chords, you can of course also enter abbreviations like mi7b5 and they will be rendered that way instead of using the ø.
You can also use extensions and alterations like b9 or #5, sus, alt, and no3. You can indicate inversions and slash chords using notations like C7/E. You can use parentheses and commas within chord symbols, and you can also enclose an entire chord symbol in parentheses.
The appearance of chord symbol text can be adjusted in the Text Styles window (right click on any chord symbol and select Text Style…).
Formatting options for chord symbols are available in Style → General... → Chord Symbols, Fretboard Diagrams. Adjustable properties are listed under the following headings:
MuseScore supports two primary styles of chords symbols: Standard and Jazz. You can select between these using the radio buttons.
In the Standard style, chords are rendered simply, with the font determined by your chord symbol text style.
In the Jazz style, the MuseJazz font is used for a handwritten look, and superscript and other formatting techniques are used as well.
The Jazz style is selected by default if you use any of the Jazz templates.
The third radio button is mostly for compatibility with older scores. You can also use it to specify your own custom chord descriptions files. These can be created by copying one of the standard files and reading the documentation within them on their structure. However, this is for advanced users only, and there is no guarantee these files will be supported in the future.
By default, MuseScore uses letter names for chord symbols. For users in regions where other note naming schemes are used, MuseScore provides the following controls:
In addition, there are options to control capitalization. By default, MuseScore automatically capitalizes all note names as shown above, whether you originally enter those using capital or lower case letters. However, you can also choose other automatic capitalization options:
You can also turn off the automatic capitalization completely, in which case note names are simply rendered the way you type them.
Note: In addition to the settings described here, the default position of applied chord symbols is also determined by settings in the Text Styles dialog. The effect is cumulative.
Enter the number of the capo position at which you want to display substitute chords, in brackets, after all chord symbols in the score.
Fingering symbols for various instruments are found in the Fingering palette in the Advanced workspace.
Guitar music uses the numbers 0–4 to represent left-hand fingering (T is occasionally used for the thumb). Right-hand fingering is indicated by the letters p, i, m, a, c. Circled numbers represent instrument strings.
The last five symbols in the palette are used for lute fingering in historical music. Note: To enable display of fingering in tablature, right-click on the TAB, select Staff Properties...→Advanced style properties, and tick "Show Fingerings".
Use any of the following methods:
When fingering is added to a note, the focus immediately shifts to the symbol, so you can adjust it right away.
To change the position of one symbol, use any of the following methods:
To change the position of multiple symbols:
Note: You can also use the fingering positioner plugin mentioned above to optimize the layout of piano fingerings.
To restore a symbol to its default position, select it and press Ctrl+R.
Fingering is a form of text symbol and can be edited and styled like any other. Right-clicking on the symbol gives you a range of options.
Liittääksesi sanat partituurin nuotteihin:
A melisma is a syllable or word that extends over two or more notes. It is indicated by an underline extending from the base of a syllable to the last note of the melisma. The underline is created by positioning the cursor at the end of a syllable and pressing Shift+_: once for each note in the melisma. See the image below:
The above lyric was created in the following manner:
For non-last syllables to extend, just use additional dashes -, only one of them will show, and the syllable will right-align to the first note, similar to last syllables that got notated with a melisma, see above.
Two syllables under a note can be joined with an elision character, also known as a "lyric slur" or "synalepha".
In the text toolbar, click on the keyboard icon , or hit F2 to open the Text Symbols palette. The synalepha is the 4th from the end (U+203F ‿ "undertie"). The synalepha will be evenly centered separating the syllables with two spaces and by inserting it after the first. For the "e͜ A" example shown above:
Not all fonts include the synalepha character. To find out which fonts on your computer support the synalepha, see "fontlist" (look for any font that shows a tie between "e" and "A" instead of a blank rectangle). The alignment of the character also varies between fonts.
Lyrics can be edited as normal text with the exception of a few characters: If you want to add a space, hyphen, or underscore to a single syllable, use the following shortcuts:
Ctrl+Space (Mac: ⌥+Space) enters a space ( ) into the lyrics text.
Ctrl+- (Mac: ⌥+-) or AltGr+- enters a hyphen ("-") into the lyrics text.
Ctrl+↵ (Mac: ⌥+Return) or Enter (from the numeric keypad) enters a line feed into the lyrics text.
The top margin and line height of all lyric lines can be adjusted globally from the menu, Style→General...→Page.
However, the horizontal (and vertical) offset of individual lyric lines can be finely adjusted by right-clicking on a word in the desired line, and using the various selection options available to select all the words that you wish to change. Then adjust using the offset option in the Inspector.
For example, to change the horizontal position of the lyrics in one staff only of one particular system: right click on a word in that line, choose Select→More..., then tick the boxes labelled "Same Staff" and "Same System". Now use "horizontal offset" in the Inspector to fine tune the line position.
To select lyrics for a range of notes, first select the range of notes (click first note, shift+click last), then right click a lyric and choose Select / All Similar Elements in Range Selection. Now use the Inspector to adjust the lyrics.
In MuseScore 2.0.3 and above, select Edit→Tools→Copy Lyrics to Clipboard.
To copy and paste lyrics from a text file into a score:
Rehearsal marks can be used in one or more ways:
Typically, a rehearsal mark consists of one or more letters or numbers, or a combination of both. Marks appear in sequence in the score—e.g. A, B, C…, or 1, 2, 3… etc.; or they may contain the number of the measure they are attached to (usually larger than plain measure numbers, often boldface and/or enclosed in boxes).
Rehearsal marks can be added to the score (i) automatically—which ensures that they are named in sequence—or (ii) manually, allowing you to name them as you wish.
The simplest way to add a rehearsal mark is to click on a note (or rest) at the start of a rehearsal section and use the keyboard shortcut Ctrl+M (Mac: Cmd+M), or use the menu command Add → Text → Rehearsal Mark: then enter the desired text yourself.
Alternatively, select a note, open the Text palette, and double-click the [B1] rehearsal mark icon: the correct letter or number is entered automatically, according to the following rules:
The first automatic rehearsal mark you create is labelled "A," the second "B," the third "C," and so on. If you want to establish a different format (lower case, number or measure-number), change the first rehearsal mark accordingly before adding the second one. Subsequently-added rehearsal marks follow the format of the previously-added mark.
If you add a (palette) rehearsal mark between two existing alphabetical marks, a "1" is appended to the name of the new mark: so a mark added between letters "C" and "D" becomes "C1," and so on. Similarly, if you add a new rehearsal mark between two existing numerical marks, an "A" is appended: so a mark added between numbers "3" and "4" becomes "3A" and so on. Afterward, you can automatically resequence the rehearsal marks, if required (see →below).
To create a series based on measure number, the first rehearsal mark should be altered, before creating a second one, so that it reads the same as the number of the measure it is attached to. (If the number of the rehearsal mark is different from the actual measure number, subsequent marks will assume a numerical order.)
MuseScore allows the user to automatically re-order a series of rehearsal marks if they have got out of sequence for any reason. Use the following method:
MuseScore automatically detects the sequence based on the first rehearsal mark in the selection—all rehearsal marks in the selection are then altered accordingly. The following sequences are possible:
To navigate to a specific rehearsal mark, press Ctrl+F (Mac: Cmd+F) to open the Find bar, then enter the name of the rehearsal mark. The first character of a rehearsal mark must be a letter for it to be found: subsequent characters can be letters or numbers. As of version 2.1 all rehearsal marks can be searched for by typing an "r" followed by the rehearsal mark.
Note: If the text entered in the Find bar consists only of numbers, the program assumes you are searching for a measure number. See Viewing and Navigation: Find.
By default, rehearsal marks are bold, in large font size, and enclosed in frames with rounded corners. All aspects of their appearance can be changed globally via the rehearsal mark Text style.