Published on MuseScore.org

Entrada de Notas

    O MuseScore permite que você entre com a notação musical a partir de quaisquer dos seguintes equipamentos de entrada: teclado do computador, mouse, teclado MIDI, ou um teclado de piano virtual. O modo de entrada padrão é o passo-a-passo, no qual as notas ou pausas são inseridas uma por vez. Entretanto, outros modos de entrada estão também disponíveis.

    Depois de sair do Assistente para configuração de nova partitura, sua nova partitura consistirá de uma serie de compassos preenchidos com pausas:

    Empty score

    Na medida em que você insere notas, as pausas de compasso são substituídas pelas pausas apropriadas para completar o restante do compasso:

    Entering notes

    Notas de diferentes durações em um mesmo tempo são inseridas em diferentes Voices:

    Voices

    Entrada de notas - básico

    Esta seção apresenta as técnicas básicas de entrada de notas e pausas no modo passo-a-passo a partir de um teclado de computador. É também recomentado que você veja o tutorial, "Getting Started: An introduction to note entry in MuseScore". Ele está disponível em Start Center.

    Passo 1. Selecionando um ponto de partida

    Selecione um ponto de partida para a entrada de notas clicando em uma nota ou pausa, ou selecionando um compasso, com o mouse. Se você não selecionar um ponto de partida, o cursor automaticamente irá para o início da partitura quando vocẽ selecionar o modo Entrada de Notas ("Passo 2" abaixo).

    Passo 2. Selecionar o modo de Entrada de Notas

    Para selecionar o modo Entrada de Notas , utilize uma das seguintes opções:

    Para sair do modo Entrada de Notas , utilize uma das seguintes opções:

    Step 3. Select a duration

    Still in Note Input mode, select a note duration using either of the following:

    Note: If you need to enter a tuplet, see Tuplet.

    Step 4. Enter the note or rest

    This method of entry also works if you are not in Note Input mode—as long as you have a note/rest selected, or the score is newly-created (in which case note entry will default to the beginning).

    Note: Note input in MuseScore overwrites existing notes or rests in a measure. If you need to insert notes you can make room for them by moving a section of the score using the copy and paste command. You can also insert new measures at any point (see Measure operations: Insert).

    Input devices

    Music notation can be entered using a computer keyboard, mouse, MIDI keyboard or the Virtual Piano Keyboard.

    Computer keyboard

    This section expands on "Basic note entry" (see above) and covers the full range of commands available for entering notes/rests from the computer keyboard.

    Note duration

    The shortcuts for selecting note duration are as follows:

    Enter notes/rests

    You can enter a note by typing the corresponding letter on your keyboard. Thus, typing C, D, E, F, G, A, B, C gives you:

    Notes: C, D, E, F, G, A, B, C

    Note: When you enter a note using the keyboard, MuseScore places it closest to the previous note entered (above or below).

    To enter a rest, type "0" (zero). Thus, typing C D 0 E results in:

    C, D, rest, E

    Note: The duration selected in the toolbar applies to both notes and rests.

    If you want to enter a dotted note, press . (period/full stop) after selecting the duration.

    For example, typing 5 . C 4 D E F G A gives you:

    Dotted quarter note: C, eighth notes: D, E, F, G, A

    Note: You will need to use more than one voice if the staff part is polyphonic.

    Move notes up/down

    To move a note up or down by a semitone:

    To move a note up or down diatonically:

    To move a note up or down by one octave:

    Add accidentals

    When a note is moved up or down with an arrow key (see above), any accidental required is automatically generated by the program. Accidentals can also be added manually—see Accidentals.

    Chords

    If you want to add a chord note above your previous entry:

    Thus, typing C, D, Shift + F, Shift + A, E, F results in:

    C, D minor triad, E, F

    To add a note at a specific interval above or below one or more notes:

    1. Ensure that one or more notes are selected;
    2. Use one of the following options:
      • From the menu, select Notes→Add Interval... and chose an interval from the list;
      • Press Alt+1-9 for intervals above (intervals below are also possible by adding relevant shortcuts to the list in Preferences).

    Note: To create chords with notes of different durations, you will need to use more than one Voice.

    Keyboard shortcuts

    Here is a list of useful editing shortcuts available in Note Input mode:

    Mouse

    It's easy to enter notes with the mouse, but it is not the fastest way to enter lots of notes.

    1. Click on the desired note duration symbol in the Note input toolbar.
    2. Click on the score to add a pitch of the selected duration.
    3. To add more notes to an existing chord, simply repeat step 2.
    4. To replace an existing chord (rather than adding to it), press Shift before clicking.

    Note: If you hover the cursor over the score in Note Input Mode it will show you a preview of the note or rest you are about to add.

    MIDI keyboard

    You can also insert pitches using a MIDI keyboard.

    1. Connect your MIDI keyboard to the computer and switch the former on
    2. Start MuseScore (this must be done after the keyboard is switched on)
    3. Create a new score
    4. Click the rest (selecting it) in measure 1 to indicate where you want note input to begin
    5. Press N to enter note input mode
    6. Select a note duration such as 5 for quarter notes (crotchets), as described above
    7. Press a note on your MIDI keyboard.

    The pitch should be added to your score.

    Note: The MIDI keyboard enters one note or chord at a time. This mode of note input (often called "step-time entry") is fast and reliable. Beginning with version 2.1 MuseScore introduced a limited real time entry mode, in which the musican plays a passage and MuseScore tries to produce the notation.

    If you have multiple MIDI devices connected to your computer, you may need to inform MuseScore which is the MIDI keyboard. Go to Edit→Preferences... (Mac: MuseScore→Preferences...). In the preferences dialog, click on the I/O tab and select your device under the section labeled "PortAudio".

    Virtual Piano Keyboard

    You can also input notes using the on-screen piano keyboard.

    The method of note entry is similar to that for a midi keyboard:

    1. Ensure that you are in Note Input mode.
    2. To enter a:
      • Single note: Click on the appropriate piano key.
      • Chord: Select the note you wish to add to, press and hold Shift, then click on a piano key (in versions before 2.1, use Ctrl (Mac: Cmd)). Repeat as required.

    Input modes

    In addition to the existing Step-time and Repitch modes, three more input modes have been added in MuseScore 2.1 (see links below). All can be accessed by clicking the small arrow next to the "N" button on the left of the Note Input toolbar.

    Note entry modes

    Coloring of notes outside an instrument's range

    Depending on the skill of the musician, certain notes are considered beyond the range of a particular instrument. For informational purposes, MuseScore optionally colors notes red if they are outside the range of a "professional" player, and olive green/dark yellow if outside the range of an "early amateur." The colors appear on the computer screen, but not on printed copies.

    Notes out of range

    To enable/disable note coloration and to set "professional" and "amateur" ranges, see Usable pitch range (Staff properties: all staves).

    Small notes/small noteheads

    1. Select the note(s) you want in small size.
    2. Check the "Small" checkbox in the Inspector. The one in the Note section is used to only change the size of the individual notehead; the one in the Chord section will change the note head, stem, beam, and flag sizes all together.

    By default, the small size is 70% of the normal size. You can change that setting in Style → General→Sizes.

    Change notes or rests already entered

    Change duration

    To change the length of a single note or rest:

    1. Make sure you are not in note input mode (press Esc to exit) and have no other notes selected.
    2. Click on the note or rest and use the duration shortcuts listed above, or the duration icons in the toolbar, to change it to the duration of your choice.

    Increasing the duration will overwrite the notes or rests that follow it; decreasing the duration will add rests between it and the notes or rests following.

    For example, to change three sixteenth rests into a single dotted eighth rest:

    1. Click on the first sixteenth rest.
    2. Hit 4 to turn it into an eighth rest.
    3. Hit . to turn it into a dotted eighth rest.

    As the duration increases, it overwrites the other two sixteenth rests following it.

    Change pitch

    To change the pitch of a single note:

    1. Make sure that you're not in note input mode and that you have no other notes selected.
    2. Select the desired note and use any of the following methods:
      • Drag the notehead up or down with the mouse;
      • Press the the keyboard arrows: ↑ (Up) or ↓ (down);
      • Type a new note letter name (A…G). Use Ctrl+↓ or Ctrl+↑ to correct the octave, if necessary (Mac: Cmd+↓ or Cmd+↑).

    To change the enharmonic spelling of a note, select it and use the J command. For more information, see Accidentals.

    To change the pitches of a passage of music by a constant interval, you can use Transposition.

    To change the pitches of a passage of music to a different melody, while keeping the rhythm unchanged, use Re-pitch mode.

    If your score contains a lot of misspelled accidentals, you might try the Respell Pitches command (see Accidentals: Respell pitches).

    Change rest to note and vice versa

    To change a rest to a note of the same duration:

    1. Make sure you are not in note input mode (press Esc to exit).
    2. Select the rest.
    3. Enter the desired pitch by entering a note letter, A–G.

    To change a note to a rest of the same duration:

    1. Make sure you are not in note input mode (press Esc to exit).
    2. Select the note.
    3. Press 0 (Zero).

    Note properties

    See also