Many score objects are text-based. For example
And so on …
Text, of whatever type, always has an object to which it is attached.
And so on …
See the table below, under "Types of text", for links to handbook pages for specific types of text.
A text object may get entered from a palette, the Add menu, or using a keyboard shortcut.
To add a text element to your score from a palette, either select one or more notes/rests and click on the desired palette item; or drag the text from the palette onto a note/rest. e.g.
If the text object is associated with a staff you can add it by selecting a note, then choosing a text option from Add→Text.
Many text types can be entered using keyboard shortcuts. You can view a list of shortcuts next to the items in Add→Text.
To create a text object, select a note, then enter the required shortcut.
To delete one or more text objects, select the objects then press Delete.
To enter text edit mode use one of the following methods:
You can now add, edit and format the text within the text object.
To leave text edit mode either press Escape or click on a part of the score outside the edit area.
The following keyboard shortcuts are available in text edit mode:
|Function||Windows & Linux||Mac|
|Move cursor||Home, End, ←, →, ↑, ↓||(Alt+) ←, →, ↑, ↓|
|Remove character to the left of the cursor||Backspace||Delete|
|Remove character to the right of the cursor||Del||→ Delete or Fn+Del|
|Start new line||↵||return|
|Insert special characters (see below)||Shift+F2||Fn+F2|
Characters not available from the standard keyboard may be accessed using the Special Characters window.
To open Special Characters In text edit mode, press Shift+F2; or click on Insert special characters in the Text section of the Properties panel.
The dialog is divided into 3 tabs: Common symbols, musical symbols and unicode symbols. The musical and unicode tabs are further subdivided into alphabetically-arranged categories.
Clicking an item in the Special Characters dialog immediately adds it to the text where the cursor is positioned. Multiple items can be applied without closing the dialog box, and the user can even continue to type normally, delete characters, enter numerical character codes etc., with it open.
A few special characters can also be created using shortcuts—see below.
Special character shortcuts
|Character||Windows & Linux||Mac||Note|
|Sharp ♯||Ctrl+Shift+#||Cmd+Shift+#||May not work on some keyboard layouts|
|Staff text||General purpose text attached to a single staff: appearing only in that instrument part.|
|System text||General purpose text attached to a single staff: appearing in all instrument parts.|
|Chord symbols||Display the chords associated with a melody: usually above the staff.|
|Fingering||Numbers or letters attached to notes showing which fingers to use.|
|Lyrics||Create lyrics attached to a melody.|
|Rehearsal marks||Facilitate rehearsals, divide score into sections, bookmark passages etc.|
|Dynamics||Indicate the loudness of a note or phrase.|
|Figured bass||Period notation for keyboarders.|
|Frame text||Title/composer/lyricist details at the start of a score; song sheet lyrics etc.|
|Headers/Footers||Page numbers, copyright info etc. at the top/bottom of a page.|
|Instrument text||Apply mid-staff instrument changes.|
|Repeats and jumps (voltas)||Da Capo, Dal segno, Fine etc.|
|Roman Numeral Analysis (RNA)||A chord analysis system.|
|Sticking||Letters (L and R) attached to (drum) notes showing which hand or foot to use.|
|Swing text||Change from straight to swing time, and vice versa.|
|Tempo marks||Apply metronome and/or expression marks.|
|Text-lines||Voltas, ottavas, pedal lines, guitar barre lines etc.|
There are three levels of text formatting in MuseScore:
When you create a text object in the score it automatically assumes a style appropriate to its class. For example, a tempo mark will have the “Tempo” style; a fingering number, the "Fingering" style and so on.
A style consists of a group of text properties (font-size, align, offset etc.) with specific values. You can view the full range of text styles in Format→Style→Text Styles.
To check the style of a selected text object, click the More button in the Text section of the Properties panel. The style name will be visible under "Text style".
Text style is the top level of formatting.
The text properties of a particular, selected text object can be viewed and edited in the Text section of the Properties panel.
This is the second-level of formatting—the text object level.
Individual characters within a text object may themselves be formatted independently.
This is the third level of formatting—the character level.
Character formatting overrides Text object formatting, which, in turn, overrides Style.
After clicking on a text object you can edit its text properties in the Text section of the Properties panel.
Click More to see:
In order to edit the characters within a text object you need to enter text edit mode using one of the following methods:
Then you can apply formatting to highlighted characters using the Text section of the Properties panel, and/or keyboard shortcuts (see Editing text).
Note that certain properties in the Properties panel are not applicable to characters—such as "Alignment", "Frame", "Text style" and so on. If you attempt to apply them, they are added to the text object instead.
If you want to change the default style properties of a particular class of objects, you can do so in the Style menu: From the menu bar, select Format→Style→Text Styles.
However, it is often better to do this from the Properties panel itself:
If you wish to change the text style associated with a text object:
For text objects applied to the staff, the default position may be above or below the staff. This may be changed at the style or text object level with the Position property (Above/Below).
Staff text and System text is general purpose text attached to a staff. It can be used for a variety of purposes not covered by other more specific types of text, e.g.
and so on.
System text appears above the top staff of a system, applies to all staves, and is present in all the instrument parts.
Staff and system text can also be found incorporated into lines.
Alternatively, drag the "Staff text" icon onto a note in the score before entering the desired text.
Alternatively, drag the "Expression text" icon onto a note in the score before entering the desired text.
Alternatively, drag the "System text" icon onto a note in the score before entering the desired text.
System text automatically appears above the top staff of the system. If you need a similar indication on a lower staff, add it to that staff using staff text.
[Adding automatically via a template? – to be added]
Staff text properties, for swing and capo settings, can be accessed as follows:
System text only has one property, swing, and this is applied using a similar context menu.
Some default properties for all staff text in the score can be set from Format→Style→Staff text.
And for system text lines, from Format→Style→System text line.
A variety of tempo markings/marks may be found in the Tempo palette. These include
Metronome marks, text, and metric modulations modify the tempo of score playback once from the point at which they are applied. Tempo change lines work with the existing tempo and vary it over a range of notes.
If required, you can override the written tempo temporarily using the Playback panel.
A tempo mark is a form of system text; it appears above the top stave but applies to all staves in the system.
To add a metronome mark, tempo text or metric modulation to the score, use one of the following methods:
To add a tempo change line, use the same method as for lines.
A metronome mark consists of a musical note indicating the duration of the beat, an equals sign, then a number showing the beats per minute (bpm). So the following mark
indicates a tempo of 80 quarter notes (crotchets) per minute, and so on.
The Tempo palette also contains text markings, such as Andante, Allegro etc. The background tempo can be read off in the Tempo section of the Properties palette.
Tempo markings can be edited just like any other text object: see Entering and editing text.
To edit the appearance of Tempo change lines, see line properties.
You are free to change the tempo number as required.
You can override the written tempo by unchecking "Follow written tempo" in the Tempo section of the Properties panel, and setting a new tempo in the "Override written tempo" box.
If the note value relationship you require is not part of an existing metric modulation, you can customise the note values as follows:
You can set the Tempo "Change amount" and "Easing method" in the Playback: General section of the Properties panel.
See above—Changing playback of tempo markings.
Default positioning properties of tempo markings can be set in Format→Style→Tempo text.
Lyrics are a form of text associated with melody lines on staves. e.g.
As you can see in the example above, lyrics are entered syllable by syllable, those within words being connected by hyphens. Underscore lines or hyphens (depending on the context) are used to indicate melismas, where a syllable extends over several notes (see below).
Lyrics are organized into verses, with verse 1 at the top and subsequent verses in order below.
In order to enter new lyrics, or to edit/format existing ones, you need to be in lyrics mode.
There are two ways to enter lyrics mode:
A melisma is a syllable that extends over more than one note.
If the melisma is at the end of a word it should be notated by an underscore line:
If a melisma occurs in the middle of a word it may be notated by hyphens instead:
To enter subsequent verses, simply repeat the steps shown under Entering syllables. Lyrics entry automatically starts in the space beneath the last entered verse.
In lyrics mode you can move up and down between verses using the keyboard arrows, ↑ and ↓.
By default, the cursor skips over rests in lyrics mode. However, It is possible to enter a syllable on a rest by selecting the rest, (re-)entering lyrics mode and typing the syllable. Then you can continue entering lyrics as above.
Characters not available from the computer keyboard may be entered in lyrics mode using the Special characters palette. A special case is highlighted below:
An Elision slur (lyric slur or synalepha) is a symbol used to join two syllables together under one note.
For example, to create the lyrics text below, starting with the syllable text "te":
For the most part, lyrics can be edited like normal text. However, as noted above, keys like - (hyphen) and _ (underscore) have a special meaning during lyrics entry. If you want to enter one of these characters as itself then an escape modifier (i.e. a shortcut) must be pressed to avoid triggering the special meaning.
|Space ( )||Ctrl+Space||Alt+Space|
|Line feed (↵)||Ctrl+Return (or Enter on the numeric keypad)||Alt+Return (or Enter on the numeric keypad)|
To make additions or changes to existing lyrics, click on a syllable and use a text edit mode shortcut to enter lyrics mode.
Lyrics are automatically deleted with their parent notes. You can also delete lyrics while leaving the notes intact, by selecting the lyrics and pressing Delete.
If you wish to position all lyrics above, instead of below, the staff:
You can of course do the same thing by selecting all lyrics in the score and changing Position to "Above" in the text section of the Properties panel.
Each verse attached to the staff is allocated a verse number—with the lowest positioned at the top and highest at the bottom. (You can of course prepend a number to the beginning of each verse, but this is a visual indication only.)
To change the verse number, select the verse and adjust "Set to verse" in the Lyrics section of the Properties panel.
Lyrics are automatically copied with their parent notes, but you can also copy lyrics on their own without the notes.
Note that the destination range should be clear of existing lyrics, otherwise the clipboard contents will be pasted on top of them.
Note: Lyrics always paste into the same verse they were copied from.
All lyrics attached to staves can be copied to the clipboard from the menu using Tools→Copy lyrics to clipboard.
You can adjust global lyrics properties from Format→Style→Lyrics.
Here you will find a number pf properties which allow you to control how hyphens between syllables are displayed:
Fingering symbols for various instruments are found in the Fingerings palette; some of these are duplicated in the Guitar palette.
Mouse over the palette icons to reveal the names of the symbols.
The different types of fingerings are as follows:
Note: If you want fingering to be displayed in tablature, right-click on the TAB, and select Staff/Part Properties…→Advanced Style Properties; then check the box labelled "Show fingering in tablature"
To add fingering to a selection of notes:
Alternatively, you can drag and drop a fingering symbol from a palette onto a single note.
When fingering is added to a note, the focus immediately shifts to the symbol, so you can adjust it right away.
To edit fingering position, see Changing position of elements.
Some fingerings can be flipped to the other side of the staff using the X shortcut, or the Flip direction icon on the note input toolbar.
General and text properties for fingering can be edited from the Properties panel.
For General properties see General settings.
For Text properties, see Formatting text.
Each of the different classes of fingering have their own text style. These can be viewed and edited from the menu: Format→Style→Text styles.
A chord symbol is an abbreviated way of representing a musical chord and its harmony.
MuseScore supports the following notations:
When you exit a chord symbol, any characters entered are automatically converted to the correct format. A root note typed in lower case turns into upper case (for alternative options, see Automatic Capitalization). And characters entered for accidentals are automatically converted into professional glyphs. For example, a "#" (hash character) automatically becomes a sharp sign (♯). Don't input, or copy and paste, unicode characters, such as U+266F (sharp sign, ♯), or U+266D (flat sign, ♭) etc, as MuseScore will not render them correctly in chord notation.
The following is a summary of keyboard shortcuts used to move the cursor in chord symbol entry mode:
|Action||Command (Windows)||Command (macOS)|
|Move cursor to next note, rest, or beat||Space||Space|
|Move cursor to next beat||; (semicolon)||;|
|Move cursor to previous note, rest, or beat||Shift+Space|
|Move cursor to previous beat||: (colon)||:|
|Move cursor to next measure||Ctrl+→||Cmd+→|
|Move cursor to previous measure||Ctrl+←||Cmd+←|
|Move cursor by duration number||Ctrl+1-9||Cmd+1-9|
|Exit chord symbol entry||Esc||Esc|
MuseScore understands most of the abbreviations used in chord symbols:
An existing chord symbol can be edited in a similar way to ordinary text: See Text editing for details.
Not to be confused with Figured bass.
The Roman Numeral Analysis (RNA) system is a type of musical analysis where chords are represented by upper- and lower-case Roman numerals (I, ii, III, iv etc.), superscripts, subscripts and other modifying symbols. It is used to notate and analyze the harmony of a composition independent of its key.
Note: MuseScore uses a specialist font, Campania, to provide the correct formatting for RNA. This is free and open source.
RNA input offers the same keyboard shortcuts for navigation as in chord symbols (see above ).
The Nashville Number System (NNS), is a shorthand way of representing chords based on scale degrees rather than chord letters. This allows an accompaniment to be played in any key from the same chord chart.
To start entering Nashville notation:
Just as with standard chord symbols, you can type Nashville notation normally and MuseScore will do its best to recognize and format the symbols appropriately. The same shortcuts used for navigation when entering standard chord symbols (e.g. Space, see above) are available for Nashville notation as well.
The default vertical alignment of all Chord Symbols can be set from the style menu, Format→ Style→Text styles→Chord Symbol.
Or you can do the same thing from the Appearance section of the Properties panel (refer to Saving and restoring default settings).
If this results in an irregular line of chord symbols, try varying Max shift above/below (Format→ Style→Chord symbols) to bring the symbols into line.
You can align a selection of chord symbols by pressing Appearance, and changing the "Offset" values; and/or by changing the "Alignment" or "Position" properties in the Text section of the Properties panel.
Chord symbols copied to a transposing instrument staff are automatically transposed in equal measure. For example, an A7 chord copied from a Flute part (non-transposing) to a B♭ Clarinet part (sounds a tone lower than written) will be transposed to a B7 chord.
Note that chords associated with guitar fretboard diagrams are not transposed automatically.
Chord symbols are automatically transposed by default when using the Transpose dialog. If this is not required, you can untick the "Transpose chord symbols" option in the same dialog.
The Capo fret position property automatically transposes chord symbols in the score (without affecting playback) and puts them in brackets after the existing chord symbols. The aim is to provide an alternative accompaniment on a capoed instrument.
To apply, select Format→Style→Chord symbols, and enter a number in the Capo fret position spin box.
By default, MuseScore uses letter names for chord symbols. For users in regions where other note naming schemes are used, all chord symbols in the score can be changed.
From the main menu, choose Format→ Style→Chord symbols. Then choose one of the following radio buttons in the spelling section:
By default, MuseScore automatically capitalizes all note names on exit, regardless of whether you entered them in upper or lower case. From the main menu, choose Format→ Style→Chord symbols. Then choose from of the following options:
You can also turn off the automatic capitalization completely, in which case note names are simply rendered the way you type them.
You can disable/enable playback of all chord symbols in the score by clicking on the cog icon to the right of the playback controls and deselecting/selecting Play chord symbols.
You can also disable/enable playback of a selection of chord symbols, by unchecking/checking Play in the General section of the Properties panel .
Default playback settings for all chord symbols in a score are available in the Playback section of Format→ Style→Chord symbols.
You can also customize the playback of selected chord symbols in the Chord symbol section of the properties panel.
MuseScore allows you to generate chords on the staff from selected chord symbols. The voicing of these chords depends on the playback settings (above) for these chords.
To realize a selection of chord symbols:
Properties specific to chord symbols (i.e. playback) are covered in Changing Playback of Chord Symbols (above)
Other non-specific properties are detailed in Properties.
Default properties for all chord symbols in a score can be edited from Format→Style→Chord symbols.
The Chord symbols style menu contains the following headings:
In the Standard style, chords are rendered simply, with the font determined by your chord symbol text style.
In the Jazz style, the MuseJazz font is used for a handwritten look, with distinctive superscript and other formatting characteristics. The Jazz style is selected by default if you use any of the Jazz templates.
The Custom style option allows you to use your own customized chord symbols style file (advanced users only).
See Changing Spelling of Chord Symbols (above).
Distance to fretboard diagram: Affects the distance between fretboard diagrams and any chord symbols above.
Minimum chord spacing: The minimum distance allowed between chords.
Maximum barline distance:
Maximum shift above/below: This is used to line up chord symbols whose vertical alignment is irregular. Experiment until you get the apperance you want.
See Customizing playback (above).
Figured bass is a shorthand notation for representing chords on a continuo instrument (such as a keyboard), using a series of numbers and other symbols written underneath the notes of the bass line.
For the relevant substitutions and shape combinations to take effect and for proper alignment, the figured bass mechanism expects input texts to follow some rules (which are in any case, the rules for a syntactical figured bass indication):
If a text entered does not follow these rules, it will not be processed: it will be stored and displayed as it is, without any layout.
Digits are entered directly. Groups of several digits stacked one above the other are also entered directly in a single text, stacking them with Enter:
Accidentals can be entered using regular keys:
These characters will automatically turn into the proper signs when you leave the editor. Accidentals can be entered before, or after a digit (and of course, in place of a digit, for altered thirds), according to the required style; both styles are properly aligned, with the accidental 'hanging' at the left, or the right.
Slashed digits or digits with a cross can be entered by adding \, / or + after the digit (combining suffixes); the proper combined shape will be substituted when leaving the editor:
The built-in font can manage combination equivalence, favoring the more common substitution:
1+, 2+, 3+, 4+ result in (or )
and 5\, 6\, 7\, 8\, 9\ result in (or )
Please remember that / can only by combined with 5; any other 'slashed' figure is rendered with a question mark.
+ can also be used before a digit; in this case it is not combined, but it is properly aligned ('+' hanging at the left side).
Open and closed parentheses, both round: '(', ')' and square: '[', ']', can be inserted before and after accidentals, before and after a digit, before and after a continuation line; added parentheses will not disturb the proper alignment of the main character.
Notes: (1) The editor does not check that parentheses, open and closed, round or square, are properly balanced. (2) Several parentheses in a row are non-syntactical and prevent proper recognition of the entered text. (3) A parenthesis between a digit and a combining suffix ('+', '\', '/') is accepted, but prevents shape combination.
To edit a figured bass indication already entered use one of the following options:
The usual text editor box will open with the text converted back to plain characters ('b', '#' and 'h' for accidentals, separate combining suffixes, underscores, etc.) for simpler editing.
Once done, press Space to move to a next note, or click outside the editor box to exit it, as for newly created figured basses.
The duration of a Figured Bass indication often lasts until the next bass note or the end of a bar. Such Figured Bass can be entered consecutively using the keyboard. (To move to a point in between, or to extend a figured bass group for a longer duration, see Duration).
Each figured bass group has a duration, which is indicated by a light gray line above it (of course, this line is for information only and it is not printed or exported to PDF).
Initially, a group has the same duration of the note to which it is attached. A different duration may be required to fit several groups under a single note or to extend a group to span several notes.
To achieve this, each key combination in the table below can be used to (1) advance the editing box by the indicated duration, and (2) set the duration of the previous group up to the new editing box position.
Pressing several of them in sequence without entering any figured bass text repeatedly extends the previous group.
|Ctrl+6||half note (minim)|
|Ctrl+7||whole note (semibreve)|
|Ctrl+8||2 whole notes (breve)|
(The digits are the same as are used to set the note durations)
Setting the exact figured bass group duration is only mandatory in two cases:
However, it is a good practice to always set the duration to the intended value for the purposes of plugins and MusicXML.
Continuation lines are input by adding an '_' (underscore) at the end of the line. Each digit of a group can have its own continuation line:
Continuation lines are drawn for the whole duration of the figured bass group.
'Extended' continuation lines
Occasionally, a continuation line has to connect with the continuation line of a following group, when a chord degree has to be kept across two groups. Examples (both from J. Boismortier, Pièces de viole, op. 31, Paris 1730):
In the# first case, each group has its own continuation line; in the second, the continuation line of the first group is carried 'into' the second.
This can be obtained by entering several (two or more) underscores "__" at the end of the text line of the first group.
The text formatting of figured bass symbols is handled automatically by the program, based on style settings (see below). Only General and Appearance properties can be adjusted from the Properties panel..
Properties of all figured bass symbols in the score can be set from Format→Style…→Figured Bass.
Line Height: The distance between the base line of each figured bass line, as a percentage of font size.
The following picture visualizes each numeric parameter:
Alignment: Select the vertical alignment: with Top, the top line of each group is aligned with the main vertical position and the group 'hangs' from it (this is normally used with figured bass notation and is the default); with Bottom, the bottom line is aligned with the main vertical position and the group 'sits' on it (this is sometimes used in some kinds of harmonic analysis notations):
Style: Choose between "Modern" or "Historic." The difference between the two styles is shown below:
|Ctrl+G||Adds a new figured bass group to the selected note.|
|Space||Advances the editing box to the next note.|
|Shift+Space||Moves the editing box to the previous note.|
|Tab||Advances the editing box to the next measure.|
|Shift+Tab||Moves the editing box to the previous measure.|
|Ctrl+1||Advances the editing box by 1/64, setting the duration of the previous group.|
|Ctrl+2||Advances the editing box by 1/32, setting the duration of the previous group.|
|Ctrl+3||Advances the editing box by 1/16, setting the duration of the previous group.|
|Ctrl+4||Advances the editing box by 1/8 (quaver), setting the duration of the previous group.|
|Ctrl+5||Advances the editing box by 1/4 (crochet), setting the duration of the previous group.|
|Ctrl+6||Advances the editing box by a half note (minim), setting the duration of the previous group.|
|Ctrl+7||Advances the editing box by a whole note (semibreve), setting the duration of the previous group.|
|Ctrl+8||Advances the editing box by two whole notes (breve), setting the duration of the previous group.|
|Ctrl+Space||Enters an actual space; useful when figure appears "on the second line" (e.g., 5 4 -> 3).|
|BB||Enters a double flat.|
|B||Enters a flat.|
|H||Enters a natural.|
|#||Enters a sharp.|
|##||Enters a double sharp.|
|_||Enters a continuation line.|
|__||Enters an extended continuation line.|
Note: For Mac commands, Ctrl is replaced with Cmd.
Rehearsal marks (sometimes called Rehearsal Letters) can be used in a number of ways. e.g.
Rehearsal marks can be added to the score in two ways: (1) manually, allowing you to name them as you wish, or (2) automatically, which ensures that they are named in sequence
To create a rehearsal mark manually and give it a name of your own choosing:
MuseScore can name the Rehearsal Marks automatically. Do either:
Notes: (1) By default, marks are added in the sequence, A, B, C etc. (2) To change the format of subsequently-added marks (to lower case letters, or numbers), edit the previous rehearsal mark accordingly. (3) Marks added between existing rehearsal marks append a number or letter to the previous mark: it is a good idea to apply the Resequence command afterwards (see below).
If you want the rehearsal marks to be displayed as measure numbers:
MuseScore allows the user to automatically re-order a series of rehearsal marks if they have got out of sequence for any reason. Use the following method:
MuseScore automatically detects the sequence based on the first rehearsal mark in the selection—all rehearsal marks in the selection are then altered accordingly. The following sequences are possible:
See Find / Go to (Navigating your score).
In most full scores any Rehearsal marks are shown only above the topmost staff of a system, but appear in all the generated instrument parts. If duplicate marks are required on lower staves they should be added as staff text.
However, some templates (e.g. Symphony Orchestra or Classical Orchestra), have an additional feature; when you create a rehearsal mark above the top staff, an identical one is automatically added just above the string section. If either instance of the mark is edited the content of both is updated.
By default, rehearsal marks appear in a large bold font, enclosed in frames, and aligned to the center of the start barline of the measure. You can edit the default text properties from Format→Style→Text style.
The properties of selected rehearsal marks can be changed in the Properties Panel.
Default positional properties for all rehearsal marks in the score can be edited from Format→Style… →Rehearsal Marks.
The header and footer areas are at the top and bottom of a page respectively. They often display useful information about the score such as the title, file name, page number, copyright details etc.
From the main menu, select Format→Style→Header, Footer:
To turn off/on the display of headers/footers, uncheck/check the "Header text" and/or "Footer text" boxes as required.
Hover the cursor over the control area in which you wish to specify text. A popup box appears displaying a list of text options, and which codes to enter to realize them.
Enter the code for the desired text in the control area. A new line should be used for each code snippet.
To create a header or footer for an instrument part, that part should be the active tab.
Note: When you create a new score, any copyright details entered on the Additional score information page of the New score dialog will appear in the footer area of the the first page. Page numbers are also displayed on subsequent pages of newly-created scores. These are default settings only, and can be changed later from the Header, Footer style dialog (above).
Metadata is information about your score file—such as the title, copyright info, file name, number of pages and so on. Each of these snippets is called a metadata tag.
Headers and footers can display metadata tags such as page number, file name etc., as well as tags whose content is shown in Project properties.
If you hover the cursor over any control area in the Header, Footer dialog (see image above) you will see a list of the metadata tags available for entry, and the (two-letter) codes to enter them.
You will notice that code entry for tags is case-sensitive. For example,
If you want to display content from the Project properties window not covered by a two-letter code, you need to enter it in the relevant control area using the format:
Enter the tag name in lower-case letters, unless the name of the meta tag in Project properties consists of two words, in which case the second word should start with an upper-case letter, and there should be no spaces between words.
In the header, footer dialog there are two check boxes for both header and footer:
To fine tune the placement of all header and footer text:
In the same way you can adjust other text properties (font, font-size etc.) from the Text section of the Properties panel.
The same adjustment can be made directly in the "Header" and "Footer" entries at Format→Style→Text styles.
Unlike other types of text, you cannot change the text properties of a single header or footer element wthout affecting all the elements in the score of the same style. This makes sense as you usually want all footer/header elements to have the same text properties.
Style properties of headers and footers are covered in Adding a header or footer to your score (above).
Text style properties are covered in Changing how headers and footers are displayed (above).
A text block is a text object entered within a frame.
Text blocks in frames have numerous uses:
and so on.
To add a text block to a frame:
Note: When you enter details of a new score (such as Title, Composer etc) on the Additional score information page of the New score dialog, these appear automatically as text blocks in a frame at the top of the first page.
The general and text properties of a selected text block can be changed in the Properties panel. In particular, you may want to
Remember to make the new setting the style default (where appropriate) by clicking on the relevant ellipsis (three dots) icon and selecting “”Save as default style for this score”.
The text properties of a selected text block can be changed in the Text section of the Properties panel.
Alternatively you may wish to choose a different text style altogether from the dropdown list under “Text style” (in Properties: Text→More)
The default properties of any text block can be edited from Format→Styles→Text Styles. Alternatively you can make changes to individual style properties from the Properties panel; see Saving and restoring default settings.