Installation unter Windows

Installation

Wenn Sie mit Windows 10 arbeiten, können Sie eine 32-Bit-Version von MuseScore aus dem Windows Store installieren. Klicken Sie hier wird die Seite von MuseScore in der Store-App geöffnet. Dort müssen Sie nur noch auf Herunterladen > und MuseScore wird heruntergeladen, installiert und anschließend automatisch aktualisiert.

Andernfalls können Sie das Windows-Installationsprogramm von der Download Seite der MuseScore-Website. Klicken Sie auf den Link, um den Download zu starten (wählen Sie zwischen 64-Bit und 32-Bit). Ihr Internet-Browser wird Sie bitten, zu bestätigen, dass Sie diese Datei herunterladen möchten. Klicken Sie auf . Herunterladen für Windows (64-Bit) Die 32-Bit Version kann von weiter unten geladen werden.

Wenn der Download beendet ist, doppelklicken Sie auf die Datei, um die Installation zu starten. Windows fordert Sie möglicherweise mit einem Sicherheitsfenster auf, dies zu bestätigen, bevor Sie die Software ausführen. Klicken Sie auf Weiter um fortzusetzen.
Der Installationsvorgang wird nun gestartet.

Wenn Sie auf Abbrechen Schaltfläche klicken, hier oder später, sehen Sie:

Wenn Sie stattdessen auf Weiter klicken um fortzufahren, zeigt der Setup-Assistent die Bedingungen der freien Softwarelizenz an.

Lesen Sie die Lizenzbedingungen, vergewissern Sie sich, dass das Kästchen neben "Ich akzeptiere die Bedingungen der Lizenzvereinbarung" markiert ist, und klicken Sie auf Weiter um fortzusetzen.

Als Nächstes werden Sie vom Installationsprogramm aufgefordert, den Ort zu bestätigen, an dem MuseScore installiert werden soll.

Wenn Sie eine neuere Version von MuseScore installieren, aber die alte Version auf Ihrem Computer behalten möchten, sollten Sie den Ordner ändern (beachten Sie, dass MuseScore 3 mit MuseScore 2 und 1 koexistieren kann, ohne dass Änderungen erforderlich sind). Andernfalls klicken Sie auf Weiter um fortzusetzen.

Klicken Sie Installieren um fortzusetzen.

Geben Sie dem Setup-Assistenten ein paar Minuten Zeit, um die erforderlichen Dateien und Konfigurationen zu installieren.

and finally

Click Finish to exit the installer. You may delete the installer file you downloaded.

Starten von MuseScore

Um MuseScore zu starten, wählen Sie im Menü Start→Alle Programme→MuseScore 3→MuseScore 3.

Fortgeschrittene Benutzer: Stille oder Benutzereingriffsloses Installieren

• Sie können MuseScore im Hintergrund mit folgendem Befehl installieren

  msiexec /i MuseScore-X.Y.msi /qb-
  

Hängen Sie ALLUSERS=1 an, wenn Sie es für alle Benutzer des Systems installieren wollen und nicht nur für den aktuellen.

MuseScore deinstallieren

Sie können MuseScore über das Menü deinstallieren, indem Sie Start→Alle Programme→MuseScore 3→Deinstallieren; oder über die Systemsteuerung von Windows. Beachten Sie, dass dadurch weder Ihre Partituren noch Ihre MuseScore-Einstellungen entfernt werden.

Fehlersuche

Das Installationsprogramm wird möglicherweise vom System blockiert. Wenn es Ihnen nicht gelingt, MuseScore zu installieren, klicken Sie mit der rechten Maustaste auf die heruntergeladene Datei und dann auf "Eigenschaften". Wenn die Meldung "Diese Datei stammt von einem anderen Computer und ist möglicherweise blockiert, um diesen Computer zu schützen " angezeigt wird, klicken Sie auf "Entsperren", "OK" und doppelklicken Sie erneut auf die heruntergeladene Datei.

Weblinks

• How to install MuseScore on Windows without administrator rights (MuseScore HowTo)
• How to run MuseScore as Administrator on Windows (MuseScore HowTo)
• How to fix MuseScore installation error on Windows (MuseScore HowTo)
• MSI command-line options
• Standard installer command-line options

MuseScore, MuseScore 3, MuseScore 4

What does this handbook cover

This handbook describes features of MuseScore Studio, the music notation program for Windows, macOS, and Linux supporting a wide variety of file formats and input methods. MuseScore Studio features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. "Musescore Studio" was previously named "MuseScore", see online announcement.

MuseScore Studio is released as a free and open-source software. Musescore Studio 3 is released under the GNU General Public License version 2. Musescore Studio 4 is released under the GNU General Public License version 3. To learn more about the GPL license, visit http://www.gnu.org or http://www.gnu.org/licenses/gpl-faq.html. To download MuseScore Studio 3.6.2, see Installation: Download and installation chapter.

MuseScore Studio is developed and supported by non paid volunteers and managed by Muse Group employees. MuseScore BVBA is a subsidiary of Muse Group. Source: wikipedia, forum discussion.

What is not covered in this handbook

The following items are often referred to as "MuseScore". However, as explained above, this handbook uses "MuseScore" to refer to "MuseScore Studio" only, "MuseScore" is not used to refer to any of the following unless otherwise specified.

• The score viewer and playback mobile apps (Android, iOS), or
• The score viewer and playback interface provided by musescore.com

See How and where to ask for support

Different versions of MuseScore Studio

MuseScore Studio is open-source. Its source code is available at github.

MuseScore Studio 3.6.2 is the last official release of MuseScore Studio 3, see Version information. For forks (wikipedia), see "External Link" section.

MuseScore Studio 4 is a result of continuous development from MuseScore Studio 3.6.2. It has huge playback and countless engraving improvements. After MuseScore Studio 3.6.2 was released, most of the software development moved on to MuseScore Studio 4. Muse Group employees no longer work on bug fixing of Musescore Studio 3.6.2. Due to the substantial change in programming framework and library, some proposed improvements of Musescore Studio 3.6.2 are impossible to be merged into MuseScore Studio 4. Reimplementation of important features is not yet complete, see also discussion1, discussion2, discussion3.

When choosing a MuseScore Studio version to create scores, users should take note of the company's distribution versioning and feature implementation philosophy, and consider production needs. For example MuseScore Studio 3.6.2 Linux supports audio and MIDI routing with JACK, which has implications for automation and video synchronization. Source: https://github.com/orgs/musescore/discussions/13745

MuseScore Studio 3 and MuseScore Studio 4 can be installed and opened side by side on the same OS, see Version 3 and 4 installations side-by-side. Score files are opened by default with the last installed Musescore Studio version, see Change default programs in Windows and Problem with Shortcuts to MuseScore 4 files. You can always choose manually with "Right-click > Open with". Note that MuseScore Studio native format (*.mscz and *.mscx) are backward compatible - MuseScore Studio 4 opens MuseScore Studio 3's *.mscz without error, see Native format compatibility

External Links

Notable forks (wikipedia):

• Musescore 3.7 Evolution
  • https://github.com/Jojo-Schmitz/MuseScore/wiki
  • Forum discussion End of Life plan for 3.x
• MuseScore3.0dev-PianoTutor
  • https://github.com/tomcucinotta/MuseScore
  • www.instructables.com "MuseScore+Arduino+LEDs+MIDI = Piano Tutor"

Install on macOS

Install

You will find the DMG (disk image) file on the download page of the MuseScore website. Click on the macOS link to start the download. When the download is complete, double-click the DMG file to mount the disk image.

Drag and drop the MuseScore icon to the Applications folder icon.

If you are not logged in as administrator, macOS may ask for a password: click Authenticate and enter your password to proceed.

When the application has finished copying, eject the disk image. You can now launch MuseScore from the Applications folder, Spotlight, or Launchpad.

Note: As of macOS 10.15 "Catalina", the system has to be told to permit MuseScore to be allowed to access user parts of the file system. The first time you use it on Catalina, it will ask you if you wish to permit it; of course, answer "yes", but if you bypass this by accident, you can set it via System Preferences > Security and Privacy > Privacy > Files and Folders. Unlock with your Admin credentials, then navigate to MuseScore (whichever version(s) you have and want), add it or them to the list of apps, and select "Documents" and "Downloads" folders, or as you prefer.

Uninstall

Simply delete MuseScore from Applications folder (Admin access will be required to do that, however). Note that this will not remove your scores, templates, extensions and plugins nor your MuseScore settings.

Install with Apple Remote Desktop

You can deploy MuseScore to multiple computers with the "Copy" feature of ARD. Since MuseScore is a self-contained application you can simply copy the application to the '/Application' folder on the target machines. It is also possible to install multiple versions of the application as long as their names differ.

Install on Linux

Distribution packages for various Linux and BSD variants are available. Building from source is another possibility.

Download

Consider your production needs to choose a MuseScore version that best suits you. For example MuseScore 3.6.2 support JACK, which has implications for automation and video synchronization, JACK support is missing from MuseScore 4.0.2.

The Download page contains basic info on how to download, install and use MuseScore.

• Current page contains info for MuseScore 4, its Older and unsupported versions section contains info for MuseScore up to 3.2.3
• Archived page on Internet Archive contains complete info for MuseScore 3.6.2, links on it may not work.
• Working direct download link for MuseScore 3.6.2 stable:
  • AppImages: https://ftp.osuosl.org/pub/musescore-nightlies/linux/3x/stable/ (musescore-$(your system architecture).AppImage, what is my system architecture?)

More info on AppImage

AppImage is the recommended way to use Musescore. An AppImage is a software that runs on all Linux (see https://appimage.org). It works like a portable app, all the files needed are contained within the AppImage itself.

To run MuseScore AppImage on your system:

Watch the how-to video, or follow these steps:

Step 1: Download a suitable version for your system architecture

AppImages come in different versions. Make sure you download the right one for your system. To check the architecture of your system:

1. Open the Terminal.
2. Type

    arch
 

or

    uname -m
 

The output will be something like "i686", "x86_64" or "armv7":

• i686 (or similar) - 32-bit Intel/AMD processor (found on older machines).
• x86_64 (or similar) - 64-bit Intel/AMD processor (modern laptop and desktop computers, most Chromebooks).
• armv7 (or later) - ARM processor (phones & tablets, Raspberry Pi 2/3 running Ubuntu Mate, some Chromebooks, usually 32-bit at present).

Download (jump to) a suitable version.

Step 2: Give the file permission to execute

There are two ways to do this:

From the File Manager:

1. Right-click on the AppImage and select "Properties".
2. Open the "Permissions" tab.
3. Enable the option labelled "Allow executing file as a program".

The process may be slightly different in other file managers.

From the Terminal:

This command works on all Linux systems (Note: The code below assumes that the AppImage is in the Downloads folder. If not the case then amend the file path accordingly):

    cd ~/Downloads
    chmod u+x MuseScore*.AppImage
 

Step 3: Run the AppImage

• To run the program, just double-click it.

Note: You can move the AppImage to wherever it is most convenient. And to "uninstall" it, just delete it.

Step 4: Install the AppImage

The above procedure allows you to run the MuseScore AppImage but doesn't integrate it with the rest of your system: it doesn't appear in your App menu, and MuseScore files are neither associated with the program nor do they have the correct icon on them.

To remedy this, you need to actually install the program as follows:

1. Open the Terminal.
2. Type the following (Note: The code below assumes that the AppImage is in the Downloads folder. If not the case then amend the file path accordingly):

    cd ~/Downloads
    ./MuseScore*.AppImage install
 

Or, alternatively, you can combine the operation into one command:

    ~/Downloads/MuseScore*.AppImage install
 

Use the "--help" and "man" options to get more information about the available command line options:

    ./MuseScore*.AppImage --help   # displays a complete list of command line options
    ./MuseScore*.AppImage man      # displays the manual page (explains what the options do)
 

More info sorted by Linux and BSD

Debian

(Ideally before, otherwise while or after) installing MuseScore itself, you can install one or more soundfont packages (if none is installed, the dependencies will pull in a suitable soundfont automatically):

• musescore-general-soundfont-small: the standard MuseScore_General soundfont in SF3 format, as shipped with MuseScore for other operating systems
• musescore-general-soundfont: the MuseScore_General HQ soundfont in SF3 format, as available via the Extensions manager
• musescore-general-soundfont-lossless: the MuseScore_General HQ soundfont in uncompressed SF2 format: takes up a lot more space on your hard disc, but offers the highest sound quality and extremely fast startup times
• fluidr3mono-gm-soundfont: the old soundfont shipped with MuseScore 2.0 (antecessor of MuseScore_General), use only if resources are very tight or you need it
• timgm6mb-soundfont: the old soundfont shipped with MuseScore 1.3; cannot substitute the others; use only if you need it; extremely tiny

Note: only the MuseScore_General soundfont (HQ or regular) supports single-note dynamics (SND), and you need at least version 0.1.6 of those soundfonts (from unstable or backports) for SND support!

The command sudo update-alternatives --config MuseScore_General.sf3 can be used at any time to select the default soundfont used by MuseScore if you install more than one (note timgm6mb-soundfont cannot be selected here).

Then, install the musescore3 package for MuseScore 3.x (the current stable version) or musescore for MuseScore 2.x (there’s also musescore-snapshot for the unstable developer preview). The packages are available in the following distributions:

• musescore3: sid (unstable), bullseye (testing/Debian 11), buster-backports (stable/Debian 10), stretch-backports-sloppy (oldstable/Debian 9)
• musescore: buster (stable/Debian 10), stretch-backports (oldstable/Debian 9), jessie-backports-sloppy (oldoldstable/Debian 8)
• musescore-snapshot: experimental (usable on unstable)

See https://backports.debian.org/Instructions/ for instructions on how to add an official Debian backports repository to your system and install packages from there.

Note: without the appropriate backports, older versions may be available: MuseScore 2.0.3 on stretch, MuseScore 1.3 on jessie. Using the latest 2.3.2 version for 2.x-format scores instead (or conversion to 3.x) is strongly recommended!

KDE neon 20.04 (focal)

Message https://musescore.com/mirabilos if the regular or PPA packages don’t work.

KDE neon 18.04 (bionic)

KDE neon switched from bionic to focal in 2021, so the following should not be necessary any more, but keeping it for now for reference:

The KDE bionic-neon packages are built on a different repository than the normal Ubuntu PPAs, as this is the only way for us to build packages for KDE neon. Due to limitations of the OpenSuSE Buildservice used, this currently only provides amd64 (64-bit PC) packages, no ARM packages (Slimbook or Pinebook remix).

All commands listed below must be entered in a terminal, in one line each.

1. Remove the Ubuntu PPAs (all three of them) from your system if you’ve ever configured it before. This is generally in /etc/apt/sources.list or one of the files below /etc/apt/sources.list.d/; if you used add-apt-repository (the recommended way) to enable the PPA, you can remove them with: sudo rm -f /etc/apt/sources.list.d/mscore-ubuntu-ubuntu-mscore*

   KDE bionic-neon is not compatible with the Ubuntu PPAs!

2. Install a few standard packages (usually they are already there, but just in case they aren’t) to be able to securely download the repository signature key:

  sudo apt-get install wget ca-certificates
 

3. Download (via secure HTTPS connection) and install the repository signing key:

  wget -O - https://download.opensuse.org/repositories/home:/mirabile:/mscore/bionic-neon/Release.key | sudo apt-key add -
 

4. Enable the repository:

  echo deb https://download.opensuse.org/repositories/home:/mirabile:/mscore/bionic-neon ./ | sudo tee /etc/apt/sources.list.d/mscore.list
 

5. Make the new packages available:

  sudo apt-get update
 

Now, it’s time to install one or more soundfont packages (ideally install the one you want before installing MuseScore):

• musescore-general-soundfont-small: the standard MuseScore_General soundfont in SF3 format, as shipped with MuseScore for other operating systems
• musescore-general-soundfont: the MuseScore_General HQ soundfont in SF3 format, as available via the Extensions manager
• musescore-general-soundfont-lossless: the MuseScore_General HQ soundfont in uncompressed SF2 format: takes up a lot more space on your hard disc, but offers the highest sound quality and extremely fast startup times
• fluidr3mono-gm-soundfont: the old soundfont shipped with MuseScore 2.0 (antecessor of MuseScore_General), use only if resources are very tight or you need it
• timgm6mb-soundfont: the old soundfont shipped with MuseScore 1.3; cannot substitute the others; use only if you need it; extremely tiny

If you skip this step, a suitable soundfont will be automatically installed when you install MuseScore itself in the final step.

Note: only the MuseScore_General soundfont (HQ or regular) supports single-note dynamics (SND), and you need at least version 0.1.6 of those soundfonts (from our repository) for SND support!

The command sudo update-alternatives --config MuseScore_General.sf3 can be used at any time to select the default soundfont used by MuseScore if you install more than one (note timgm6mb-soundfont cannot be selected here).

Finally, you can install the latest stable version of MuseScore with sudo apt-get install musescore3 and the old 2.x version with sudo apt-get install musescore (the musescore-snapshot package with an instable developer preview is also available).

Ubuntu, Kubuntu, Xubuntu, …

WARNING: these instructions are not for KDE neon 18.04 (bionic) users (see above)! Later versions, such as KDE neon 20.04 (focal), should work though.

MuseScore 2.x (the old version) is available from 18.10 (cosmic) to 19.10 (eoan) out of the box. Older Ubuntu releases carry older versions (18.04 (bionic) has 2.1, 16.04 (xenial) has 2.0, 14.04 (trusty) and 12.04 (precise) have 1.3 and 1.2, respectively). Similar to the Debian instructions, we recommend using the latest 2.3.2 version for old 2.x scores instead, or migrating those scores to MuseScore 3.

Besides the versions supplied by the distribution itself, the MuseScore Debian packager provides newer versions of MuseScore for older Ubuntu releases in official PPAs (package archives).

Please activate the Stable releases of MuseScore 3 repository on your system and then install the musescore3 package, available for all releases from 18.04 (bionic) onwards. (It is not feasible to provide MuseScore 3 for older Ubuntu releases, as those lack the minimum Qt version required by MuseScore 3.)

If you wish to install the older MuseScore 2, activate the Stable releases of MuseScore 2 PPA and install the musescore package, available for 12.04 (precise), 14.04 (trusty), 16.04 (xenial), and 18.04 (bionic) onwards. (Some intermediate releases may have slightly older MuseScore versions still available, but it’s best to update to the next LTS.) On the ancient 12.04 (precise) and 14.04 (trusty) releases, this will upgrade the Qt library in your system, which may break unrelated software (and on 12.04 even the C++ libraries are upgraded), mind you; best to upgrade to a newer LTS.

There’s also a MuseScore Nightly Builds (unstable development builds) PPA, from which the daring can install the musescore-snapshot package, for LTS, that is, 18.04 (bionic) only.

WARNING: these PPAs are only suitable for Ubuntu/Kubuntu/Xubuntu/… but not for Debian or KDE bionic-neon!

As with Debian, you can install one or more soundfont packages (ideally install the one you want before installing MuseScore, but if you don’t, a suitable one will be installed alongside MuseScore):

• musescore-general-soundfont-small: the standard MuseScore_General soundfont in SF3 format, as shipped with MuseScore for other operating systems
• musescore-general-soundfont: the MuseScore_General HQ soundfont in SF3 format, as available via the Extensions manager
• musescore-general-soundfont-lossless: the MuseScore_General HQ soundfont in uncompressed SF2 format: takes up a lot more space on your hard disc, but offers the highest sound quality and extremely fast startup times
• fluidr3mono-gm-soundfont: the old soundfont shipped with MuseScore 2.0 (antecessor of MuseScore_General), use only if resources are very tight or you need it
• timgm6mb-soundfont: the old soundfont shipped with MuseScore 1.3; cannot substitute the others; use only if you need it; extremely tiny

Note: only the MuseScore_General soundfont (HQ or regular) supports single-note dynamics (SND), and you need at least version 0.1.6 of those soundfonts (possibly from the PPA) for SND support!

The command sudo update-alternatives --config MuseScore_General.sf3 can be used at any time to select the default soundfont used by MuseScore if you install more than one (note timgm6mb-soundfont cannot be selected here).

See also the hints for the various distributions on the download page.

External links

• How to run the MuseScore AppImage on Linux (MuseScore HowTo, video)

Install on Chromebook

Desktop program

MuseScore runs on Chrome OS within a Linux container (also known as Crostini). There is a special procedure you can use to install MuseScore on a Chromebook if you are not already comfortable with running Linux apps. See the article Install MuseScore on Chromebook for more information. You can also get a special build of MuseScore 3 for ARM processors via that link (the official builds are only for Intel).

Alternatively, if you prefer to use the plain Linux commands, follow the steps described in the video linked below:

1. Install Linux Virtual Machine called Crostini. Go to Settings > Linux > Turn On
2. Download Musescore AppImage package
3. Configure AppImage to run. Set chmod +x for the AppImage file
4. Run AppImage with ./ followed by the Musescore package file name

5. Install required libraries if necessary, e.g.:

   • sudo apt-get install libvorbisfile3
   • sudo apt-get install libnss3

6. Install AppImage (using the install command line option) to avoid running it from Linux command line each time

7. Enjoy!

External links

• Watch this interactive video for more details
• Special article on how to Install MuseScore on Chromebook
• How to run MuseScore on ChromeOS (MuseScore HowTo)