Barlines

A range of barline symbols for most ordinary purposes can be found in the Barlines palette (Basic workspace); repeat barlines, only, are also available in the Repeats & Jumps palette (Basic and Advanced). Additional symbols can be found in the Barlines palette of the Advanced workspace. It is also possible to create your own custom barlines (see below).

Change barline type

To change an existing barline, use one of the following:

• Select a barline, or measure, in the score, then click an icon in the Barlines palette (double-click in versions prior to 3.4).
• Drag an icon from the Barlines palette onto a barline, or measure, in the score.
• Select an existing barline in the score, then adjust "Style" in the "Barline" section of the Inspector.

To change a non-single to a single barline:

• Select the barline and press Del.

To hide a barline:

• Select the line and press V, or uncheck Visible in the Inspector.

Insert barline

To insert a new barline between existing ones, either:

• Drag an icon from the Barlines palette onto a note or rest.
• Select a note or rest, then click an icon in the Barlines palette (double-click in versions prior to 3.4).

Split a measure

You can insert a barline in order split a measure into two separate ones. Use one of the following methods:

• Press Ctrl (Mac Cmd) and drag the line from the Barline palette to the first note of the new measure.
• Select the first note of the new measure and press Ctrl (Mac Cmd) while you click a barline in the Barline palette (double-click in versions prior to 3.4).
• If the first two methods cause crashes in Musescore 3.6.2 on Windows, select the first note of the new measure and press Alt while you double-click a barline in the Barline.

Note: As of version 3.1 (or earlier), all barlines entered this way are entered as Normal Barlines. See also Split a measure.

Custom barlines

It is possible to create custom barlines by selecting one or more barlines, and adjusting the properties in the "Barlines" section of the Inspector:

• Style: Choose from a range of preset barlines.
• Span to next staff: joins the selected barline to the barline in the staff below.
• Span from: Sets the position of the top of the barline. "0" is the top staff line. Positive numbers start lower down the staff, negative numbers above.
• Span to: Sets the position of the bottom of the barline (see "Span from").
• Span presets: Use the buttons to apply preset customized barlines.

See also Mensurstrich.

Changes to color and horizontal/vertical offset can also be made in the Inspector.

Connect barlines

Barlines may extend over multiple staves, as in the grand staff of a piano, or in an orchestral score to join instruments in the same section. To join barlines:

1. Enter Edit mode on a barline.

   

2. Click on the lower blue handle and drag it down to the staff you wish to connect to. The handle snaps into position so there is no need to position it exactly.

3. Press Esc to exit edit mode. This will update all other relevant barlines as well.

   

Vertical alignment

Vertical alignment is absent because barlines are layout automatically according to content. A workaround for vertical alignment is to insert invisible short rests of same length at another voice, or Anchors for Dynamics and Hairpins plugin to automate the process.

See also

• Measure operations (Measure Properties dialog)
• Measure (Layout and formatting style)
• Repeats and jumps for information on repeat barlines
• Add fermata to barline

Clefs

Commonly used Clefs (Treble, Bass, Alto, Tenor) can be found in the Clefs palette in the Basic workspace. For a more complete range, see the Clefs palette in the Advanced workspace (see image below).

Add a clef

Add/change clef at the beginning of a measure

• Select a measure or an existing clef and click a clef symbol in the palette (double-click in versions prior to 3.4).
• Drag a clef from the palette onto a measure or an existing clef.

Add/change a mid-measure clef

• Select a note or rest, then click a clef in the palette (double-click in versions prior to 3.4).
• Drag a clef from the palette onto a note or rest
• If a mid-measure clef is already present you can also:
  • Select the clef and click a clef in the palette (double-click in versions prior to 3.4).
  • Drag a new clef from the palette onto the clef.

Note: "Mid-staff" clefs are always smaller than the main system clef.

Example: In the following image, the top staff starts with a treble clef and switches immediately to bass clef, then after a note and a rest, changes back to treble clef.

Note: Changing a clef does not change the pitch of any note. Instead, the notes move to preserve pitch. If you want, you can use Transposition in conjunction with a clef change.

Remove a clef

• Select a clef and press Del.

Courtesy clefs

When a clef change occurs at the beginning of a system, a courtesy clef will be generated at the end of the previous system.

To show or hide all courtesy clefs:

1. From the menu, select Format→Style...→Page;
2. Check/uncheck "Create courtesy clefs."

It is also possible to show/hide courtesy clefs on a case-by-case basis:

1. "Create courtesy clefs" should already be ticked in the "General" menu (see above);
2. Select a clef and tick/untick "Show courtesy" in the Inspector.

Hide clefs

Display clef only in the first measure (for all staves)

1. From the menu, select Format→Style...→ Page;
2. Uncheck "Create clef for all systems."

Display clef only in the first measure (for a particular staff)

1. Right-click on the staff (Mac: Ctrl-click) , select Staff properties... and uncheck "Show clef;"
2. Open the master palette and select the "Symbols" section;
3. Drag and drop a clef from the master palette onto the first measure of the staff; OR select the first note and click a clef in the master palette (double-click in versions prior to 3.4).

Note: This option may be useful to TAB users who do not want the clef to repeat on every subsequent line.

Hide all clefs in a particular staff

1. Right-click on the staff (Mac: Ctrl-click) , and select Staff properties...;
2. Uncheck "Show clef."

Key signatures

Standard key signatures are available in the Key Signatures palette in the Basic or Advanced workspaces. It is also possible to create custom key signatures (below).

Note that key signatures are always defined relative to concert pitch. If you are adding a key signature to a staff for a transposing instrument you should add the relevant concert pitch key signature. The correctly transposed key signature will show on the staff (unless you are viewing in concert pitch mode).

Add a new key signature

Add new key signature to all staves

Use any of the following methods:

• Select a measure and click a key signature in the palette (double-click in versions prior to 3.4).
• Select a note or rest and click a key signature in a palette (double-click in versions prior to 3.4).
• Drag a key signature from the palette onto an empty part of a measure or a note or rest.

Add new key signature to one staff only

If you wish to change the key signature of only one staff line, leaving others unchanged:

• Press Ctrl (Mac: Cmd) and hold while you drag a key signature from a palette onto a measure.

Replace an existing key signature

Replace key signature for all staves

Use any of the following methods:

• Select the key signature to be replaced, and click a new key signature in a palette (double-click in versions prior to 3.4).
• Drag a key signature from the palette onto the key signature to be replaced (or onto the measure containing the key signature).

Replace key signature for one staff only

If you wish to replace the key signature of only one staff, leaving others unchanged:

• Press Ctrl (Mac: Cmd) and hold while you drag a key signature from a palette onto the key signature to be replaced (or onto the measure containing the key signature).

Remove a key signature

Use any of the following methods:

• Click on an existing key signature and press Del.
• Drag the empty key signature ("open/atonal") from the palette (in the advanced workspace) onto the measure.

Naturals on key signature changes

By default, MuseScore only shows cancelling naturals when the key signature changes to that of C Major/A minor (no sharps or flats). In all other cases, it simply shows the new key signature without cancellations:

However, you can opt to display cancelling naturals for all key signature changes:

1. From the menu, select Format → Style... → Accidentals. You'll see the options:

   

2. Select one of the three options.

3. If you are in a part and want the new option to apply to all parts, click on Apply to all parts.
4. Click OK to exit.

For example, selecting the option "Before key signature if changing to fewer ♯ or ♭" gives:

And the option "After key signature if changing to fewer ♯ or ♭. Before if changing between ♯ and ♭" gives:

Key signature changes and multimeasure rests

Multimeasure rests are interrupted if there is change of key signature:

Courtesy key signatures

To turn off the display of a particular courtesy key signature:

• Select the relevant key signature and untick "Show courtesy" in the "Key Signature" section of the Inspector.

To turn off the display of all courtesy key signatures:

• From the menu, select Format → Style... → Page, and untick "Create courtesy key signatures."

Note: Courtesy key signatures are not displayed at section breaks.

Custom key signatures

To create a custom key signature:

1. Press Shift+K to display the Key signatures section of the Master palette.

   

2. In the Create Key signature panel, drag accidentals from the palette onto the staff above to create the desired key signature. Note: The treble clef is only decorative—custom key signatures for any type of staff can be created here.

3. Use the Clear button, if required, to remove all accidentals from the "staff."
4. To move the new key signature into the library (center panel), press Add. To delete a key signature from the library, right-click it (Mac: Ctrl-click) and, in the drop-down menu, select Delete.

Note: A limitation of custom key signatures is that they cannot be transposed in the usual way. If a transposition is needed, or where there is a clef change, you will need to create a new custom key signature.

To move a key signature from the Master palette to a custom palette:

• Drag and drop the key signature onto a palette.

To apply a key signature to the score directly from the Master palette, use one of the following methods:

• Select a measure and click a key signature in the Master palette (double-click in versions prior to 3.4).
• Drag a key signature from the Master palette onto a measure; alternatively, to apply to one staff only, hold Ctrl (Mac: Cmd) while dragging.

External links

• How to change enharmonic key signatures for transposing instruments (MuseScore HowTo, video)

Accidentals

The most common types of accidentals are provided in the Note Input Toolbar above the score and in the Accidentals Palette in the Basic workspace preset.
A more comprehensive range can be found in the Accidentals Palette after applying the Advanced workspace preset.

Add or remove an accidental and brackets

Accidentals are automatically added, replaced or removed to a note when you change its pitch:

• Change note pitch:
  • ↑: Increase the pitch of a note by one semitone (favors sharps).
  • ↓: Decrease the pitch of a note by one semitone (favors flats)
• And then change the enharmonic spelling

To add directly either (i) a bb double flat or x double sharp, (ii) a courtesy (also known as cautionary or reminder) accidental, or (iii) a non-standard accidental, use one of the following options:

• Select a note and click on an accidental in the Toolbar above the score, or
• Use the Accidentals Palettes, either
  • Select a note and click an accidental (double-click in versions prior to 3.4), or
  • Drag an accidental on to a note; or

• Add from Accidentals category of the Master palette using the select and click or drag and drop method. Do not add from Symbols category, they are non-functional visual symbols, see Notation types.

  
  In the above diagram, the second accidental is added from Symbols category of the Master palette, it does not use automatic layout and the note pitch does not change (C instead of C#).

To add brackets (only available for courtesy/cautionary/reminder accidental), use one of the following:

• Select the accidental in the score and click the parentheses symbol in the Accidentals palette (double-click in versions prior to 3.4), or
• Drag the parentheses symbol from the palette onto the accidental, or
• Select the accidental and choose from the Bracket type dropdown in the Inspector.

Delete an accidental directly by selecting it and pressing Del, note pitch corrects automatically.

Change enharmonic spelling

To change the enharmonic spelling of a note, or notes, in both written and concert pitch views:

1. Select a note, or group of notes;
2. Press J;
3. Continue pressing J to cycle through the enharmonic equivalents.

To change the enharmonic spelling in the written pitch view, without affecting the concert pitch view, or vice versa:

1. Select a note, or group of notes;
2. Press Ctrl+J (Mac: Cmd+J);
3. Continue pressing the same combination of keys to cycle through the enharmonic equivalents.

Note: If the pitches of selected notes are not all the same, the effect may be unpredictable.

Respell pitches

• From the menu, select Tools→Respell Pitches.

See also

• Key signature: Change
• Tuning systems, microtonal notation system, and playback

External links

• Accidental at Wikipedia
• Enharmonic at Wikipedia

Time signatures

Time signatures can be found in a Palette of the same name in both the Basic and Advanced workspaces.

Note: Whether or not a time signature is actually shown depends on the staff properties, by default it is not shown for tablature.

Add or replace a time signature

Use any of the following methods:

• Select a time signature, measure, note or rest, and click a time signature in a palette (double-click in versions prior to 3.4).
• Drag and drop a time signature from a palette onto a space in a measure, or onto an existing time signature.

Delete a time signature

• To delete a time signature in the score, select it and press Del.

Create a time signature

If the time signature you require is not available in any of the existing palettes, it can be created using one of the following methods:

From the Time Signatures palette

Available as of version 3.3.

1. In the Time Signatures palette, click on "More", then, in the supplementary palette, click on the "Create Time Signature" button;
2. In the top line, enter the Numerator, Denominator, and Text (the latter is optional where you need the display to be different from the actual time signature).
3. Adjust the default note beaming in the Note Groups section. To restore the default beaming pattern, press Reset;
4. Press the "Add" button to transfer the newly-created time signature to the Time Signatures palette.

From the Master palette

1. Press Shift+T to display the Time signatures section of the Master Palette;
2. Select a time signature to edit in the center panel;
3. In the top line of the Create Time Signature panel, enter the Numerator, Denominator, and Text (the latter is optional where you need the display to be different from the actual time signature).
4. Adjust the default note beaming in the "Note group" section". To restore the default beaming pattern, press Reset;
5. Press Add to add the newly-created time signature to the center panel. To delete a time signature from the center panel, right-click (Mac: Ctrl-click) on it and select Clear.
6. Drag and drop the time signature from the Master Palette to the Time Signatures palette. You can also drag the time signature direct to the score, if desired.

Fractional time signatures

Starting in version 3.5.1 there is limited support for fractional time signatures. Only ½ and ¼ are supported at this time. If your keyboard does not have the characters on them you can enter them using Alt+0189 for ½ and Alt+0188 for ¼ on some operating systems. You can also copy/paste from here.

Time signature properties

To display the Time Signature Properties dialog, use any of the following:

• Select the time signature, then click on "Properties" in the "Time Signature" section of the Inspector.
• Right-click (Mac: Ctrl-click) on a time signature and select Time Signature Properties….

• Global value: Shows the global time signature and is set automatically when you add a time signature to the score. It is the reference for beats (as shown in the status bar) and tempo markings.
• Actual value: Shows the time signature associated with a particular staff. This is normally the same as the global time signature, but can be set independently if required. See Local time signatures.
• Appearance: Allows you to edit the displayed text without affecting the underlying time signature. For an example, see Additive meters.
• Note Groups: Allows you to change the default beaming of notes associated with a time signature. See Change default beaming.

Change default beaming

To change beaming of individual notes, see Beams instead.
To adjust note-beaming for a particular time signature:

1. Select the time signature, then "Properties" in the "Time Signature" section of the Inspector; or right-click (Mac: Ctrl-click) on the time signature and select, Time Signature Properties…;
2. To break a note beam in the Note Groups panel, click on the note following it. To reset the beam, click in the same place. Alternatively, you can change beaming by dragging a beam icon onto a note, as follows:
   • Start beam at this note.
   • Do not end beam at this note.
   • 1/8th note beam to left of this note.
   • 1/16 note beam to left of this note.

Checking the box for "Also change shorter notes," means that any beam changes at one level are applied automatically to shorter durations as well. The Reset button cancels any changes made in that session.

Additive (composite) meters

Additive (or composite) time signatures are sometimes used to clarify the division of beats within a measure. To use an additive time signature:

• Create a new custom time signature, see above, or
• Modify an existing time signature on the score:
  1. Right-click (Mac: Ctrl-click) on a time signature in the score and select Time Signature properties…;
  2. In the Appearance section, adjust the "Text" property as required;
  3. Adjust note beaming in the Note Groups section if required.

Local time signatures

In certain cases a score may show staves with different time signatures running at the same time. For example, in Bach's 26. Goldberg Variation:

In the above example, the global time signature is 3/4, but the time signature of the upper staff has been set independently to 18/16.

To set a local time signature for just one staff:

• Hold down Ctrl (Mac: Cmd) and drag and drop a time signature from a palette onto an empty measure.

Resize time signature

• Select one or more time signatures and, in the "Time Signature" section of the Inspector, adjust the "Scale X" (width) and "Scale Y" (height) values.

Pickup measures and cadenzas

Occasionally you will need to decrease or increase the duration of a measure without changing the time signature—for example, in a pickup measure (anacrusis) or in a cadenza etc. See Measure operations: Measure duration.

Time signature changes and breaks

Multimeasure rests are interrupted when a time signature change occurs. Also, a section break will prevent a courtesy time signature being shown at the end of the previous measure.

See also

• Key signature

External links

• How To Using Polyrhythm, mixed meters and local time signatures in MuseScore (MuseScore HowTo)
• Additive meters at Wikipedia.

Arpeggios and glissandi

Arpeggio and Glissando symbols can be found in the "Arpeggios & Glissandi" palette in the advanced workspace. This palette also includes strum arrows, an arpeggio bracket, wind instrument articulations, and slide in/slide out symbols.

Add symbol

To add an arpeggio, glissando etc. to the score, use one of the following methods:

• Select one or more notes, then click a symbol in a palette (double-click in versions prior to 3.4).
• Drag a symbol from a palette onto a note.

Adjust dimensions

To adjust the length and height of a symbol:

• Enter Edit mode for the symbol, and adjust the handles using keyboard shortcuts.

Custom symbols

After selecting a symbol, various useful properties can be adjusted in the "Glissando" or "Arpeggio" section of the Inspector.

Glissando

• Type: Choose between a straight or wavy line;
• Show text: Tick this box if you want the symbol to display text. Then set the wording, font-face, font-size and font-style underneath. Note: If there isn't enough room between notes, the text is not displayed;
• Play: Check/uncheck the box to turn playback on or off.
• Play style: Choose how the glissando plays back. There are four options: Chromatic, White keys, Black keys, Diatonic;

Arpeggio

• Stretch: Increase this to lengthen the duration of the arpeggio.
• Play: Untick if you don't want the symbol to affect playback.

If needed for future use, you can save the result in a custom palette.

Arpeggios

When an arpeggio or strum arrow is added to the score, it initially spans only one voice. To change the height, see Adjust dimensions (above). Playback of the symbol can be turned on or off in the Inspector.

Adjust vertical range of an arpeggio

Add the arpeggio to the top staff, select it and use Shift+↓ to extend it downwards to the next stave without it affecting distance between those staves.

Note: For this to work the notes in the 2 staves need to be in the same voice. And it won't affect playback.

Glissandi (slides)

A Glissando or, more informally, a slide, spans two consecutive notes. It may be wavy or straight, with or without text. E.g.:

Adjust start and end points of a glissando

To move an end handle vertically or horizontally, from one note to the next:

1. Enter edit mode on the symbol;
2. Click on the start or end handle:
   • Use Shift+↑↓ to move the handle up or down, from note to note.
   • Use Shift+←→ moves the handle horizontally, from note to note.

Use this command to create cross-staff glissandi. Or to correct the positions of end handles when applying multiple glissandi to chords.

Wind instrument articulations

Fall, Doit, Plop and Scoop symbols are provided. To change the length and curvature, select the symbol, enter edit mode and adjust the handles as described in Edit mode: Lines.

Slide in/out

Slide in and Slide out lines can also be found in the "Arpeggios & Glissandi" palette. To edit the length and angle of a line, double-click on it and drag the handle (or use the Inspector or keyboard arrows for finer adjustment).

External links

• Arpeggio at Wikipedia
• Glissando at Wikipedia

Articulations and ornaments

A comprehensive set of symbols can be found in the Articulations palette in the Advanced workspace:

and the Ornaments palette (Advanced workspace):

There is also an abbreviated version of Articulations palette in the Basic workspace.

Articulations

Articulations are the symbols added to the score to show how a note or chord is to be played. The principal symbols in this group are:

• Fermatas
• Accents (>)
• Staccato and variations—including mezzo-staccato (portato), staccatissimo.
• Tenuto
• Marcato (^)

Specialist articulations are also included for bowed and plucked strings, wind instruments etc.

Ornaments

Ornaments include:

• Mordents, Inverted Mordents, Pralltrills
• Trills
• Turns
• Bends

Note: Appoggiaturas and acciaccaturas can be found in the Grace Notes palette.

Add articulation/ornament

Use either of the following methods:

• Select a note or a range of notes, then click a symbol in a palette (double-click in versions prior to 3.4).
• Drag a symbol from a palette onto a notehead.

Add accidental to an ornament

To apply an accidental to an existing ornament, such as a trill:

1. Select the note to which the ornament is attached;
2. Open the Symbols section of the Master palette;
3. Search for and apply the desired accidental to the score (small accidentals can be found using the search term "figured bass");
4. Drag the accidental into position (or reposition using keyboard shortcuts or the Inspector).

Add fermata to a barline

Use one of the following methods:

• Select a barline, then click a fermata symbol in a palette (double-click in versions prior to 3.4).
• Drag a fermata symbol from a palette onto a barline in the score.

Note: This does not affect playback.

Keyboard shortcuts

• Toggle Staccato: Shift+S
• Toggle Tenuto(─): Shift+N
• Toggle Accent(>): Shift+V
• Toggle Marcato(^): Shift+O
• Add Acciaccatura (grace note): /

Keyboard shortcuts can be customized in MuseScore's Preferences.

Adjust position

Immediately after adding an articulation or ornament from a palette, the symbol is automatically selected: It can then be moved up or down from the keyboard as follows:

• Press up/down arrow keys for fine positioning (0.1 sp at a time);
• Press Ctrl+↑ or Ctrl+↓ (Mac: Cmd+↑ or Cmd+↓) for larger vertical adjustments (1 sp at a time).
• To flip a symbol to the other side of the note (where applicable), select it and press X.

To enable adjustments in all directions from the keyboard:

1. Enter Edit mode on the symbol;
2. Press arrow keys for fine positioning (0.1 sp at a time); or press Ctrl+Arrow (Mac: Cmd+Arrow) for larger adjustments (1 sp at a time).

You can also change the horizontal and vertical offset values in the Inspector. To position more than one symbol at a time, select the desired symbols and adjust the offset values in the Inspector.

Note: The symbol can also be repositioned by clicking and dragging, but for more precise control, use the methods above.

Articulation and ornament properties

For Fermatas, see Fermatas section in Tempo for their properties and effect on playback.
These can be edited from the Articulation section of the Inspector and may include:

• Placement: Above or below the staff.
• Direction: Auto / Up / Down.
• Anchor: Adjust the vertical placement of the symbol.
• Time stretch: Obsolete. Use Fermatas section of Inspector instead
• Ornament style: Default or Baroque.
• Play: Turn playback on or off.

For Bend properties, see Bends.

You can find additional global style settings for articulations and ornaments under Articulations, Ornaments.

Playback

Playback of note affected by articulation symbols varies among instruments, the general effect:

• Staccato : shorter
• Tenuto(─): longer (no effect on Strings eg violins)
• Marcato (^) : louder and shorter
• Accent (>) : louder (louder than using a Marcato) and longer (no duration extension effect on Strings eg violins)

To find out the effect of each instrument, save your score as .mscx, open it as plaintext, find <Articulation> and its <velocity> and <gateTime> values. see <Articulation name="sforzato"> for accent (>) symbol

To achieve your desired playback, either:

• inside Musescore: add multiple symbols, toggle their Play and Visible properties. You can also set the note itself's Velocity and Velocity type properties, or
• edit per instrument settings in your saved file: save your score as .mscx, open it as plaintext and edit the instrument articulation definitions. These modifications do not affect new instruments added later, or
• edit default settings in instrument.xml affecting new instruments.

See this battle between jazz and classical musicians on the forum for more details.

See also

• Grace notes
• Fermatas in Tempo
• Dynamics (sfz symbol)

External links

• How to create trills and ornaments with accidentals (and playback) (MuseScore HowTo)
• Ornaments at Wikipedia

Beams

Adjust automatic note beaming

By default, MuseScore beams notes according to settings in the Time Signature Properties dialog. To change this automatic pattern of note-beaming, see Change default beaming.

Change beaming of individual notes

MuseScore also allows you to override the default beaming of any note, using the beam symbols in the Beam Properties palette of the "Basic" or "Advanced" workspaces:

To change one or more note beams (except feathered beams, below), use one of the following methods:

• Drag and drop a beam symbol from the Beam Properties palette onto a note or rest in the score.
• Select one or more notes and/or rests in the score and click the desired symbol in the Beam Properties palette (double-click in versions prior to 3.4).

To apply feathered note beams, use either of the following methods:

• Drag and drop a feathered-beam symbol from the Beam Properties palette onto a note beam in the score.
• Select one or more note beams in the score, then click on a feathered-beam symbol in the Beam Properties palette (double-click in versions prior to 3.4).

Notes: (1) Feathered beams may use 2 or 3 lines depending on the tempo and the desired rate of the change; (2) To create a 2-line feathered beam, you need to start with a continuous run of beamed sixteenth notes; (3) To create a 3-line feathered beam, you need to start with continuous run of beamed thirty-second notes; (4) Playback of feathered beams is not supported.

Beam symbols and their effects

Icon	Name	Description
	Beam start	If the note is beamed to a previous note, break the beam.
	Beam middle	Create a beam from the selected note to the previous note (if applicable). This applies to Beam 16th sub and Beam 32nd sub as well.
	No beam	Break beams before and after the selected note.
	Beam 16th sub	Start a second level beam at this note.
	Beam 32nd sub	Start a third level beam at this note.
	Automatic Beam	Apply default beaming as determined by the current time signature (see above).
	Feathered beam, slower	Start feathered beam to indicate gradually slower tempo.
	Feathered beam, faster	Start feathered beam to indicate gradually faster tempo.

Note: Be aware that the beam between two notes/rests is determined by both of the note/rests. For example: Two consecutive notes with a status of start beam here will not have a beam between them. If the two consecutive notes are set up to connect to each other they will beam, if one of them is not set up for this, the two notes will not beam.

Adjust beam angle

To adjust with the keyboard or mouse:

1. Enter edit mode on the note beam—the right adjustment handle is automatically selected.
2. Use the up/down arrows or drag the right end handle to change the angle of the beam;
3. Press Esc to exit edit mode.

To adjust with the Inspector:

1. Click on a note beam.
2. Tick the "User position" box in the "Beam" section of the Inspector;
3. Set the "Position" values to get the desired beam angle.

Adjust beam height

To adjust with the keyboard or mouse:

1. Enter edit mode on the note beam—the right adjustment handle is automatically selected.
2. Press Shift+Tab or click the middle handle to select it (use the left handle prior to 3.4);
3. Use the up/down arrows or drag the middle handle to change the height of the beam (use the left handle prior to 3.4);
4. Press Esc to exit edit mode.

To adjust with the Inspector:

1. Click on a note beam.
2. Tick the "User position" box in the "Beam" section of the Inspector;
3. Set the "Position" values as desired.

Make beam horizontal

1. Select a note beam
2. Tick the "Force Horizontal" box in the "Beam" section of the Inspector;

Note: "Force Horizontal" in the "Beam" section of the Inspector can only be selected if "Custom position" has been deselected previously. This setting overrides the Custom Position values and automatically sets the horizontal bar to its original height.

If you want all note beams in the score to be horizontal there is a "Flatten all beams" option in Format→Style…→Beams. If this option is not selected, automatically inclined beams will be set according to the pitch of the connected notes. This global setting can be overridden for individual beams according to the methods described above.

Adjust feathered beams

To adjust feathered beams:

1. Select a note beam.
2. Adjust the values in the "Grow left" and "Grow right" boxes in the "Beam" section of the Inspector.

Local relayout

MuseScore spaces notes according to their time values, allowing for accidentals, lyrics etc. In systems where there is more than one staff, this may result in irregular note spacing, as in the following example:

Local relayout is a tickbox option in the Inspector allowing you to specify those passages in the score where you want the note spacing to be independent of other staves in the system. Applying "Local relayout" to the note beams in the top staff of the previous example results in a more even distribution of notes:

To do a local relayout:

1. Select one or more note beams.
2. Tick the option Local relayout in the "Beam" section of the Inspector.

Flip note beam

To flip a beam from above to below the notes, or vice-versa:

1. Select one or more note beams.
2. Use any of the following options:
   • Press the X key;
   • Press the "Flip direction" icon, , in the toolbar.
   • Select a "Direction" option (Auto, Up or Down) in the "Beam" section of the Inspector.

Reset Beam Mode

To restore beams to the mode defined in the local time signatures:

1. Select the section of the score you want to reset. If nothing is selected, the operation will apply to the whole score;
2. Select Format→Reset Beams.

See also

• Cross-staff notation
• Edit mode
• Note input
• Change default beaming

External links

• How beams work (MuseScore Tutorial)
• How to add a beam over a rest (MuseScore HowTo)
• How to place a beam between notes (MuseScore HowTo)
• Traditional Vocal Beaming (MuseScore Plugin)

Brackets

MuseScore provides brackets and a curly brace in the Brackets palette (Advanced workspace).

When a new score is created using a template, MuseScore automatically sets the correct brackets.

Add

To add a bracket or brace to systems, use one of two methods:

• Select a measure on the staff where you want the bracket/brace to start, and click the desired icon in a palette (double-click in versions prior to 3.4).
• Drag a bracket/brace icon from a palette on to the staff where you want the bracket/brace to start.

Delete

• Select the bracket and press Del.

Change

• Drag the desired icon from a palette onto an existing bracket/brace in the score.

Edit

When you first apply a bracket it only spans one staff. To extend to other staves:

1. Enter Edit mode.
2. Drag the handle downwards to span the required staves. The handle snaps into position, so exact placement is not required.

Style

The default thickness and distance from the system of brackets and braces can be adjusted in Format→ Style... → System.

In the System Brackets section, you can set the properties for the brackets in the two boxes on the left, and the properties for the braces in the two boxes on the right.

Notation types

There are two fundamentally distinct types of notational functionality in Musescore, designed and implemented from the beginning for different purposes:

• Functional symbols and text that when added to a score, optionally,
  • automatically use a desirable Layout and formatting,
  • affect the score semantically in a way that is most useful or makes most sense (the consensus after careful discussions among Musescore BVBA admins)
  • is automatically replaced when you add another symbol or text so that the score makes sense, for example adding an accidental sharp # removes the existing flat b , and
  • provide an expected playback effect created by Synthesizer.
• Non-functional symbols and text that when added to a score,
  • serves visual purpose only, and does not affect the score semantics, because either
    • the sheer amount of notations and the rare usage of most of them makes implementation impractical, or
    • the digital resource itself is not created or maintained by Musescore dev team, for example items inside the Bravura font by Steinberg (Github) and the SMuFL codepoint - glyph definitions (wikipedia), or
    • there is no consensus on its musical interpretation yet, or
    • it is a visual marking popularly used on a score but has minimal musical effect,
  • can be attached to a symbol or text on the score in a way that isn't normally supported,
  • does not affect Synthesizer playback, and
  • is not removed unless you deliberately do so.

Musescore usually create a functional item when you do common editing such as pressing a keyboard shortcuts, clicking a toolbar button, or adding an item from the palette, as it is the most common expectation. Musescore uses different classes of elements internally, their usage are not interchangeable: They have distinct property fields that serves different purpose besides engraving or visual display. For example, if you add a Staff Text and type a #, it can never be configured to change a note's pitch, you must create a new accidental. See also Text types.

Musescore is shipped with non-functional symbols and text not interpreted by Musescore (yet), such as historical clefs under the SMUFLs of Bravura font, Musescore also provides non-functional versions of most functional items. These can be found under the Symbols category in the Master palette. Use a non-functional symbol or text when:

• you do not want it interpreted by Musescore,
• you want to attach it in a way that isn't normally supported, like attaching an accidental to a barline,
• for example, the non-functional verions of the sharp # symbol does not provide automatic layout and does not change a note's pitch, see the example in the Accidentals chapter.

Alternatively, insert Images onto a score.

Resizing

A specific non-functional symbol or text on a score can sometimes be achieved by the two approaches different in resizing capability:

• Add the symbol directly from the Symbols category of the Master palette:
  • it has a fixed size that scales with the score properly, but
  • you cannot assign a custom "Font Size" setting in the Inspector.
• Add a Text, and then add the symbol as a unicode glyph using Text editing: Insert a special character:
  • the number of unicode musical glyphs are limited,
  • you can assign a custom "Font Size" setting, and other settings such as "Font Family", in the Inspector,
  • the symbol-text sizing and alignment is tricky.

Images inserted onto a score are resizable, .svg files enlarges without blurring, see Images.

See also

Text types

External links

Discussion on symbol usage

Breaths and pauses

Breath and pause markings are available in the Breaths & Pauses palette (Advanced workspace).

Add symbol

To add a breath, or pause (aka caesura / "tram lines" / "railroad tracks") to the score, use one of the following options:

• Select a note or rest and click a breath or pause symbol in a palette (double-click in versions prior to 3.4).
• Drag a breath or pause symbol from a palette onto a note or rest in the score.

The symbol is placed after the note. Its position can be adjusted by editing the X and Y offsets in the Inspector, or, in edit mode, using the arrow keys.

Adjust pause length

You can adjust the pause length (in seconds) of the added symbol in the Inspector.

Grace notes

A grace note is a type of musical ornament, usually printed smaller than regular notes. The Short grace note, or Acciaccatura, appears as a small note with a stroke through the stem. The Long grace note, or Appoggiatura, has no stroke.

Create grace notes

Grace notes can be found in the "Grace notes" palette in the Basic or Advanced workspace.

Add a grace note

Use one of the following methods:

• Select a regular note and click a grace note in a palette (double-click in versions prior to 3.4).
• Drag a grace note symbol from a palette onto a regular note.
• Select a note and press / to create an acciaccatura only.

This will add a grace note of the same pitch as the regular note. To add a sequence of grace notes to a regular note, simply repeat the above actions as many times as required. See also, Change pitch (below).

Note: When a grace note is added to the score, a slur is not automatically created with it, so the latter needs to be added separately. See Slurs.

Add a chord of grace notes

Grace note chords are built up just like regular chords:

1. Enter the first note of the chord as shown above
2. Select this first grace note and enter subsequent notes as you would for any other regular chord (i.e. Shift+A...G).

You can also create a grace note chord by using the add interval shortcut in step 2: Alt+1...9 for intervals from a unison to a ninth above.

Change pitch

The pitch of a grace note can be adjusted just like a regular one:

1. Select one or more grace notes
2. Adjust pitch using the keyboard arrow commands, namely:
   • ↑ or ↓ to increase or decrease the pitch by a semitone;
   • Alt+Shift+↑ or Alt+Shift+↓ to increase or decrease the pitch one step at a time, according to the key signature.

Change duration

• Select the grace note and either click a duration icon on the toolbar, or apply the duration with the appropriate keyboard shortcut: i.e. 1...9 (see Note input).

Manual adjustment

Horizontal position

To adjust the horizontal space between a grace note and its regular parent note, use one of the following:

• Go into edit mode on the grace note, then use the left/right arrow keys to reposition as desired.
• Select the grace note and change the X-offset value in the Chord section of the Inspector.

Other adjustments

Various other properties of the grace note can be adjusted in the Inspector (see "Element," "Chord", and "Note" sections)—such as vertical position, size, stem properties etc. The exception is "Leading space" which only applies to standard notes.

External links

• Grace note at Wikipedia
• Appoggiatura at Wikipedia
• Acciaccatura at Wikipedia

Hairpins

Hairpins are symbols used to indicate gradual changes in volume in the score. There are two kinds: crescendo (getting louder) and decrescendo (getting quieter).

Add a hairpin

1. Select a range of notes or measures;
2. Use one of the following shortcuts:
   • <: to create a crescendo hairpin.
   • >: to create a diminuendo hairpin (decrescendo).

Alternatively, use one of the following options:

• Select a range of notes or measures, and click a hairpin in a palette (double-click in versions prior to 3.4).
• Drag and drop a hairpin from a palette onto a staff line.

NOTE: Placing hairpins on different voices of the same staff at the same time does not create desired playback, it is a limitation of Musescore, because the minimal area of effect on playback loudness (Dynamic Range property) is staff, not voice. If playback is priority, try splitting voices into individual instruments.

Adjust length and height

A hairpins is a type of Line with playback properties, and its length is adjusted similarly:

1. Enter edit mode on the hairpin. Then click on the end handle that you want to move:

   

2. Use one of the following shortcuts:

   • Shift+→ to move the end handle, and its anchor, right by one note or rest.
   • Shift+← to move the end handle, and its anchor, left by one note or rest;
   • and then Tab once to select the start handle, then Shift+→ and Shift+← to adjust it.

   This method of extending or shortening the hairpin maintains playback integrity and allows it to cross line breaks:

   

3. To fine-tune the horizontal position of an end-handle (without changing playback), use the following shortcuts:

   • → to move the handle right by 0.1 sp.
   • ← to move the handle left 0.1 sp.
   • Ctrl+→ (Mac: Cmd+→) to move the handle right one sp.
   • Ctrl+← (Mac: Cmd+→) to move the handle left one sp.

To change the height of a hairpin:

• Adjust Height property, or
• Adjust the lower handle at the mouth of the hairpin (e.g. the blue square below):

Cresc. and dim. lines

In addition to hairpins, there are cresc.   _     _     _ and dim.   _     _     _ lines with the same function in the Lines palette. Edit the text in the Text Line Details property.

To turn a hairpin into its equivalent text line:

Pick an option in the Type property.

Copy hairpins

From version 3.1, a hairpin can be cut, copied and pasted just like a text element: see Summary of cut / copy / paste commands.
For versions prior to 3.1, you can only duplicate a hairpin: see Copying lines.

Edit hairpin properties

Properties of the hairpin can be edited in the Inspector:

• Under Element Section: Edit the Y offset to change the height of the hairpin above or below the staff.
• Under Line Section: Edit line properties such as color, line style and thickness.
• Under Text Line Details Section: Add text and set text properties.
• Under Hairpin Section:
  • Type: 4 options of hairpins (Arrow symbol, or expression text with a dashed line).
  • Circled tip: Additional circle symbol at the narrower end.
  • Height: The width at the wider end.
  • Continue height: The width of the hairpin at the end of a system on a page, before it continues to the next system.
  • Placement: Position on page, above or below staff. Press X to flip.
  • Dynamic range: Area of effect of the symbol:
    • System: Every instrument in the score.
    • Part: One instrument (all of its staffs), default.
    • Staff: One staff (eg one hand in piano) regardless of voices. As of MuseScore 3.6.2, this option is incompatible with the Staff / Part properties: single note dynamics playback mechanism, see forum discussion.
  • Velocity change:
    • 0 to 127. Magnitude of change in playback loudness across the span of the hairpin.
    • Choose an appropiate Type for desired direction of change.
    • The end MIDI velocity calculated by adding this value to (or subtracting this value from) the starting note's MIDI velocity (see Dynamics (symbol): loudness of a note), without any other mathematical conversion (it is not a percentage change).
    • For examples, a crescendo of Velocity change = 15 placed on a phrase with a starting note of MIDI velocity = 49 affects playback loudness of the phrase by assigning MIDI velocity from 49 up to 64 to the phrase across its timespan.
  • Use single note dynamics: (Version 3.1 and above) Enable playback loudness variation across the timespan of each of the note itself. Affects instrument supporting Single Note Dynamics only.
  • Dynamic Mode: (Version 3.1 and above) Rate of transition: Linear (default), Ease-in and out, Ease-in, Ease-out, or Exponential.

Playback of hairpins

MuseScore development focuses on engraving support, rather than playback support. Using hairpins without dynamics symbols are perfectly acceptable in real life scoring, but do not create desired playback inside Musescore.

To create playback loudness variation across a hairpin, either:

• create a note loudness difference (see "To create desired loudness" below) between the two ends of the hairpin, and make sure the difference does not contradict with the meaning of the hairpin, or
• use a non-zero "Velocity change" value, see above.

To create desired loudness:

• One popular way is to place Dynamics symbols and, optionally, make them invisible in the Inspector. eg p crescendos f .
• Note loudness is mainly determined by MIDI velocity, which is most commonly assigned by Dynamics symbols placed onto a score, a dynamics symbol affects playback from the parent note onward until the next dynamics symbol. Final barlines or rests do not reset the loudness to default. Notes which do not have loudness affected by any dynamics symbol can be considered to be in mf (mezzoforte), and has MIDI velocity 80.

To create desired timing, create anchor points for hairpin to adjust its length upon:

• Split a note and add a tie, or
• Add short rests to an unused voice and make them invisible in the Inspector, or
• Use the Anchors for Dynamics and Hairpins plugin to automate this process.

Complex notations are handled this way:

• Only the first hairpin affects playback loudness in case of redundant hairpins, such as two crescendos between p and f.
• Only the last placed hairpin affects playback loudness in case of redundant hairpins affecting the same note (overlapped Dynamic range settings).

Incorrect hairpins do not affect playback: eg f crescendo p.

For all instruments, each individual note under a hairpin can have its playback loudness affected by presence of hairpins at the moment of note start.

MuseScore 3.1 and above
For instruments supporting Single Note Dynamics (e.g. strings, brass etc.), loudness variation can also occur across the span of the note, and across a series of tied notes . This can be switched off individually with the Use single note dynamics checkbox property.

See also

• Dynamics symbols
• How to setup Musescore 3.x for correct playback for all dynamics and hairpins

Lines

The Lines palette of the Advanced workspace contains the following lines:

As you can see, the palette includes: Slurs, Hairpins, Volta brackets, Octave lines, and many others.

Applying lines to the score

Most lines (except Slurs, Volta brackets and the Ambitus) can be applied from a palette in the following ways:

To apply a line to just one note

1. Click on a note, then Ctrl+Click on the next note;
2. In a palette, click on a line (double-click in versions prior to 3.4).

To apply a line across a range of notes

1. Select a range of notes;
2. In a palette, click on a line (double-click in versions prior to 3.4).

To apply a line from a note to the end of that measure

Use any of the following methods:

• Click on a note, then, in a palette, click on a line (double-click the latter in versions prior to 3.4).
• Drag and drop a line onto the score.

To apply a line across a range of measures

1. Select one or more measures;
2. In a palette, click on a line (double-click in versions prior to 3.4).

To repeatedly apply the same line

To efficiently apply the same item again, such as adding end to end pedal marks to a piano phrase, setup and use a keyboard shortcut, see Palettes.

Lines and playback properties

Some lines, such as Hairpins, Voltas, Ottavas etc., also have an effect on the playback of the score itself. Each end handle is connected by a dotted line to an anchor on the staff (visible in Edit mode). These anchors indicate the extent of the playback effect.

Adjust vertical position

In Normal mode, apply one of the following methods:

• Click on one or more lines and change the vertical offset in the Inspector;
• Click on a line, press and hold Shift and drag it up/down with a mouse.

Note: You can also adjust the vertical position in Edit mode.

Change length

Note: The following two methods move the end of the line and its anchor together. This ensures that correct playback of the score is maintained (if applicable), and that the line can be extended between systems if required.

Using keyboard shortcuts

1. Enter Edit mode and click on an end handle;
2. Apply one of the following shortcuts:
   • Shift+→ to move the end handle, and its anchor, to the right by one note (or, in the case of Voltas, one measure)
   • Shift+← to move the end handle, and its anchor, to the left by one note (or, in the case of Voltas, one measure);

By dragging (as of version 3.5)

• Click on the end handle of a line and drag it with the mouse.

Fine adjustment

To make fine adjustments to the position of the line end (without changing the position of the anchor):

1. Enter Edit mode and click on an end handle;
2. Apply one of the following shortcuts:
   • → to move the handle right by 0.1 sp (1 sp = one staff space = the distance between two staff lines).
   • ← to move the handle left 0.1 sp.
   • Ctrl+→ (Mac: Cmd+→) to move the handle right one sp.
   • Ctrl+← (Mac: Cmd+→) to move the handle left one sp.

Text lines

A text line is a line that has text embedded within it—such as a volta, ottava, guitar barre line etc.

When you apply a text line to the score from a palette, the line properties always remain unchanged, but the text properties may, under certain circumstances, assume those of the current style for text lines. For details, see Behavior of applied text and lines.

Custom lines

Any line in the score can be customized by adjusting its properties in the Inspector, as follows:

1. Select the line;
2. If line hooks are needed, make a selection from Begin hook, End hook and Height (in the Text Line Core section);
3. To add text, tick Begin Text, Continue Text or End Text, then type in the "Text" box:
   • Begin: Text added here appears at the beginning of the line;
   • Continue: Text added here appears at the beginning of a continuation line (in the next system, if any);
   • End: Text added here appears at the end of the line;
4. Edit text properties and alignment as required;
5. Edit Placement: "Above" or "Below" sets the text so that it is on the line. "Left" places the text to the left of the line;
6. Make adjustments to the line color, thickness and style (solid, dashed etc.) in the Line section. The Diagonal option allows you to create a diagonal line by dragging the end handles;
7. To save the result for future use, see Custom palettes.

Copying lines

Once applied to the score, lines cannot be copied using the usual copy and paste procedures. However, you can duplicate lines within a score:

• Press and hold Ctrl+Shift (Mac: Cmd+Shift), click on the line and drag it to the desired location.

Extended ornament lines

To add an accidental to an extended ornament (e.g. a trill line), select the line and click on a symbol in the Accidentals palette (double-click in versions prior to 3.4).

External links

• Piano pedal marks at Wikipedia
• Guitar Barre at Wikipedia

Measure rests

Full measure rest

A whole rest, centered within a measure (shown below), is used to indicate that an entire measure (or a voice within a measure) is silent, regardless of time signature.

To create one or more full measure rests

Use the following method if all selected measures are "standard"—i.e. with no custom durations:

1 Select a measure, or range of measures.
2. Press Del (Mac: Backspace).

If one or more of the measures contains a custom duration, use the following method instead:

1. Select a measure, or range of measures.
2. Press Ctrl+Shift+Del (Mac: Cmd+Shift+Backspace).

To create a full measure rest in a particular voice

1. In the appropriate voice, enter a rest that extends for the full measure.
2. Make sure the rest is selected, then press Ctrl+Shift+Del (Mac: Cmd+Shift+Backspace).

If the voice contains only rests you can select the first rest and invoke the conversion keystroke.

Multimeasure rest

A Multimeasure rest indicates a period of silence for an instrument: the number of measures is shown by the number above the staff.

Multimeasure rests are automatically interrupted at important points, such as double barlines, rehearsal marks, key- or time signature changes, section breaks etc. and also at measures that are set to break multimeasure rests.

To display multimeasure rests

To turn multimeasure rests on or off:

• Press M on your keyboard.

Alternatively:

1. From the menu, choose Format→Style….
2. Click on the "Score" tab, if it is not already selected;
3. Tick/untick "Create multimeasure rests". Here you can also set the minimum of empty measures to combine into a multimeasure rest (see also Layout and formatting: Score).

Note: It is recommended that you enter all notes in the score first before enabling multimeasure rests.

Break multimeasure rest

You may want to have a multimeasure rest divided into two multimeasure rests:

1. Ensure that the option to display multimeasure rests in the score is off (see above).
2. Right-click on the measure where you want the second multimeasure rest to start;
3. From the menu, choose Measure Properties and tick "Break multimeasure rest."
4. Enable multimeasure rests again

See also: Measure operations: Break multimeasure rest.

Octave lines

Octave (Ottava) lines are used to indicate that a section of music is to be played one or more octaves above or below written pitch: The line may be dotted or solid. Ottavas are available in the Lines palette of the Basic and Advanced workspaces.

8─────┐or 8va─────┐: Play one octave above written pitch
8─────┘or 8va─────┘: Play one octave below written pitch

8va alta/bassa lines are particularly common in piano scores, though they are sometimes used in other instrumental music.¹ 15ma alta (2 octaves above) and 15ma bassa (2 octaves below) are also occasionally used.

MuseScore automatically adjusts playback of the score under the ottava to the correct pitch.

Apply an octave line

See Applying lines to the score.

And to adjust the vertical position, see Lines: Adjust vertical position.

Change length

See Lines: Change length.

Custom lines

Ottavas can be customized just like any other line. See Custom lines and line properties.

Properties unique to Octave lines can be adjusted in the Ottava section of the Inspector:

• Type: Change the Ottava line text.
• Placement: Set to "Above" or "Below" the staff.
• Numbers only: Untick for both number and text (e.g. "8va"). Tick for a number only (e.g. "8").

External links

• Octave at Wikipedia

Slurs

A slur is a curved line between two or more notes indicating that they are to be played legato—smoothly and without separation. Not to be confused with Ties, which join two notes of the same pitch.

There are a number of ways to add a slur to a score, and all may be useful depending on the context (adding a slur from the lines palette is also possible but not recommended).

Add slur in note-input mode

1. While in Note input mode, type in the first note in the slurred section;
2. Press S to begin the slurred section;
3. Type in the remaining notes in the slurred section;
4. Press S again to end the slurred section.

Add slur in Normal mode

Method 1

1. Make sure you are in Normal mode;

2. Select the note where you want the slur to start:

   

3. Press S to add a slur extending to the next note:

   

4. (Optional) Hold Shift and press → (right arrow key) to extend the slur to the next note. Repeat as required:

   

5. (Optional) Press X to flip the slur direction:

   

6. Press Esc to exit edit mode:

   

Method 2

1. Make sure you are in Normal mode;
2. Select the note where you want the slur to start;
3. Choose one of the following options:
   • To add a slur to one voice only: Hold down Ctrl (Mac: Cmd) and select the last note that you want the slur to cover.
   • To add slurs to all voices: Hold down Shift (Mac: Cmd) and select the last note that you want the slurs to cover.
4. Press S.

Adjust slur

If you only want to adjust the position of a slur:

1. Select the slur;
2. Use any of the following methods:
   • Drag the slur.
   • Adjust the horizontal and vertical offset values in the Inspector.

To adjust all the properties of a slur (length, shape and position):

1. Make sure you are not in note input mode;
2. Go into Edit mode on the slur;
3. Click on a handle to select it, or use Tab to cycle through the handles;
4. To move the left and right handles from note to note, use the following shortcuts:
   • Shift+→: Move to next note.
   • Shift+←: Move to previous note.
   • Shift+↑: Move to lower voice (voice 2 to voice 1 etc.).
   • Shift+↓: Move to higher voice (voice 1 to voice 2 etc.).
5. To adjust the position of any handle, use any of the following methods:
   • Drag the handle.
   • Use the arrow keys for fine adjustment (0.1 sp. at a time). For larger adjustments (1 sp. at a time) use Ctrl+→ ← ↑ ↓.
6. Press Esc to exit edit mode.

Note: The two outer handles adjust the start and end of the slur, whilst the three handles on the curve adjust the contour. The middle handle on the straight line is used to move the whole slur up/down/left/right.

Extended slurs

A slur can span several systems and pages. The start and end of a slur is anchored to a note/chord or rest. If the notes are repositioned due to changes in the layout, stretch or style, the slur also moves and adjusts in size.

This example shows a slur spanning from the bass to the treble clef. Using the mouse, select the first note of the slur, hold down Ctrl (Mac: Cmd) and select the last note for the slur, and press S to add the slur.

X flips the direction of a selected slur.

Dotted/dashed slurs

Dotted slurs are sometimes used in songs where the presence of a slur varies between stanzas. Dotted slurs are also used to indicate an editor's suggestion (as opposed to the composer's original markings). To change an existing slur into a dotted or dashed slur, select it and then in Inspector (F8) change Line type from Continuous to Dotted or Dashed.

See also

• Tie
• Edit mode
• Note input

Ties

A tie is a curved line between two notes of the same pitch, indicating that they are to be played as one combined note (see external links below). Ties are normally created between adjacent notes in the same voice, but MuseScore also supports ties between non-adjacent notes and between notes in different voices.

In note-input mode, if you specify a tie immediately after entering a note or chord, the program automatically generates the correct destination notes to go with the ties. Or, you can simply create ties "after the fact," between existing notes.

Note: Ties, which join notes of the same pitch, should not be confused with slurs, which join notes of different pitches and indicate legato articulation.

Add ties in Note Input mode

The following command adds an identical tied chord to the selected chord.

1. Ensure that a note is selected (i.e. highlighted). This can be a single note on its own or part of a chord.
2. Select a new note duration for the following note(s), if required (but see "Note" below).
3. Press + or the tie button, .

Note: This shortcut works, as described above, only if there is no chord following the selected note. If there is, then the duration is ignored and the tied note is added instead to the following chord.

Add ties in Normal mode

Method 1

1. Select one or more noteheads in the "start" chord.

   

2. Press +, or the toolbar tie button, :

   .

Ties will be created between the selected note(s) and the next available note(s) of the same pitch.

To remove ties, as of MuseScore 3.3.3, use the same command (toggle)

Method 2

This method ties all notes in the "start" chord (where possible):

1. Select the stem of the "start" chord;
2. Press +, or click on the toolbar tie button .

Ties will be created between all the notes in the selected chord and the following notes of the same pitches.

To remove ties, as of MuseScore 3.3.3, use the same command (toggle).

Add extra tied notes to a previously tied chord

Occasionally you may need to return to an existing tied chord in order to add one or more extra tied notes. In this case a different command is used. For example:

1. Add the extra notes to the first chord. e.g.
   
2. In Note input mode, and with any of the notes in the first chord selected, press Alt++. Corresponding notes are added to the following chord and the extra notes are tied:
   

Add ties to unison notes

A workaround is required to create ties between unison notes:

1. Create the first note as usual;
2. Any additional unison notes should be added at an interval other than unison: e.g. 2nd, 3rd, 4th etc.
3. Create a tied chord (as shown above): e.g.
   
4. Move the unison note(s) into position: e.g.
   

Flip a tie

X flips the direction of a selected tie, from above the note to below the note, or vice-versa.

See also

Slur

External links

• How to create ties leading into a 2nd ending (MuseScore HowTo)
• Ties (music) at Wikipedia

Tremolo

Tremolo is the rapid repetition of one note or chord, or a rapid alternation between two notes or chords. Tremolo symbols can be found in the Tremolo palette in the advanced workspace: both one note and two note tremolos are possible.

A one-note or one-chord tremolo is indicated by strokes through the stem of the note or chord (or above/below if a whole note). E.g.

In a two-note or two-chord tremolo, bars are drawn between the notes. E.g.

Tremolo symbols are also used to notate drum rolls.

Add a Tremolo

Single note/chord tremolo

1. If a single note, select that note; if a chord, select any note in the chord;
2. Click the desired symbol in the Tremolo palette (double-click in versions prior to 3.4).

Alternatively, you can drag the tremolo symbol onto the applicable note.

Two note/chord tremolo

1. Input the notes at half the desired final duration;
2. If a single note, select the first note of the pair; if a chord, select any note from the first chord;
3. Click the desired symbol in the Tremolo palette (double-click in versions prior to 3.4).

Alternatively, you can drag the tremolo symbol onto the applicable note.

Example: To enter a two-note tremolo with the duration of a half note (minim), enter two normal quarter notes (crotchets). After applying a tremolo symbol to the first note, the note values automatically double to half notes.

External links

• Tremolo (Wikipedia)
• How to create 'old style' and other special tremolos? (MuseScore HowTo)

Repeats and jumps

Simple repeats

You can create a simple repeat by placing a start and an end repeat barline at the beginning and end of a passage. These can be applied from the Barlines or Repeats & Jumps palette.

Note: If the start of a repeat coincides with the beginning of a piece or section, the start repeat barline can be omitted if desired. Similarly, an end repeat barline can be omitted at the end of a score or section.

1st and 2nd endings

First create a simple repeat (as shown above), then apply the first and second time endings—see Voltas.

Playback

Turn repeat playback on/off

• Toggle the "Play Repeats" button on the toolbar.

Adjust repeat section playback

Simple repeats, such as the ones illustrated above, or "1, 2" volta sections, usually play back correctly first time. More complex repeats may need further adjustment as follows:

1. Ensure that the start and end barlines are correctly positioned. For a volta section, ensure that each volta, except the last one, terminates with an end repeat barline.
2. In the case of a simple repeat, where more than one repeat is needed, right-click on the measure containing the end repeat barline and select Measure properties. Adjust Play count so that it is equal to the number of times you want the section to play back.
3. In the case of a complex volta section, such as the following:
   
   Make sure that the volta "Repeat list" is set up correctly—see Volta properties. Right-click on the measure containing the end repeat barline and select Measure properties. Adjust Play count so that it is one greater than the number of measures listed in the Volta "Repeat list." In this case, since 5 measures are listed, the "Play count" needs to be set to 6.

Repeat symbols and text

Text and symbols related to repeats are located in the "Repeats & Jumps" palette (in the Basic and Advanced workspaces). This palette contains:

• Symbols for measure repeat, Segno, Segno Variation (Serpent), Coda, and Coda Variation (Codetta)
• D.S., D.C., al Coda, al Fine, To Coda, and Fine text
• Repeat barlines

To add a repeat symbol to the score use either of the following:

• Select a measure, then click the desired repeat symbol in the palette (double-click in versions prior to 3.4).
• Drag and drop a repeat symbol from the palette onto (not above!) the desired measure (so the measure changes color).

Jumps

Jumps are symbols in the score which tell the musician to skip to a named marker (see below). Jumps include the various kinds of D.C. (Da Capo) and D.S. (Dal Segno) text.

To set correct playback of jumps:

• Make sure that the "Play Repeats" button on the toolbar is selected. This is a toggle, so you can turn off playback by clicking the same button.

• After the jump, and following established convention, only the last round of any simple repeat section is played back. If you want playback to take these repeats in full:

  1. Select the applicable jump symbol;
  2. In the "Jump" section of the Inspector, check "Play Repeats".

  Note: Jumps are taken only after all simple repeats in the section are played through.

If you click on a jump, some text boxes and a checkbox are displayed in the Jump section of the Inspector. These have the following effects on playback:

• Jump to: Playback jumps to the marker whose "Label" is the same as the "Jump to" tag.
• Play until: Playback continues until it reaches a marker whose "Label" is the same as the "Play until" tag.
• Continue at: Playback jumps to the next marker whose "Label" is the same as the "Continue" tag.

• Play repeats: Ticking this box tells MuseScore to play repeats after D.C. (Da Capo) or D.S. (Dal Segno) jumps. If this option is not ticked then simple Repeats are not taken after jumps and playback works as if it were the last repeat.

  Note: The tags start and end, referring to the beginning and end of a score or section, are implicit and don't need to be added by the user.

Markers

Markers are the places referred to by the jumps. A list of markers (in addition to the implicit "start" and "end") follows:

• : Segno (tag: segno)
• : Segno Variation (tag: varsegno)
• : Coda (tag: codab)
• : Coda Variation (tag: varcoda)
• Fine: (tag: fine)
• To Coda: (tag: coda)

If you click on a marker, the following properties appears in the Marker section of the Inspector:

• Marker type: This can be changed from the dropdown list, if required.
• Label: This is the (identifier) tag associated with the marker. See also, Jumps (above).

Examples of jumps

• Da Capo (D.C.): At the "D.C." sign, playback jumps to the start (i.e. to the implicit start tag) and plays the entire score or section again (i.e. up to the implicit end tag).
• Da Capo (D.C.) al Fine: At the "D.C. al Fine" sign, playback jumps to the start (i.e. to the implicit start tag) and plays the score up to the Fine (i.e. the fine tag).
• Dal Segno (D.S.) al Fine: At the "D.S. al Fine" sign, playback jumps to the Segno symbol (i.e. the segno tag) and then plays up to the Fine (i.e. the fine tag)
• Dal Segno (D.S.) al Coda: At the "D.S. al Coda" sign, playback jumps to the Segno symbol (i.e. the segno tag) and then plays up to the To Coda (i.e. the coda tag). Playback then continues at the Coda symbol (i.e. the codab tag).

Note: The properties (i.e. the tag names) of jumps and markers can be set via the Inspector.

You need to modify them if using multiple jumps and markers.

See also

• Barlines
• Volta

External links

• MuseScore in Minutes: Repeats and Endings, part 2 (video tutorial)
• How to separate a coda from the rest of the score (MuseScore HowTo)
• How to create a 2-measure repeat sign with playback (MuseScore HowTo)
• How to use Jumps and Repeats (MuseScore HowTo with examples)

Tuplets

Tuplets are used to write rhythms beyond the beat divisions usually permitted by the time signature. For example, a triplet consists of three notes in the time of two:

And a duplet consists of two notes in the time of three:

Create a tuplet

The exact method of tuplet entry depends on whether you are starting off in Note input mode or Normal mode. We'll start off with a simple example: the creation of an eighth note triplet.

Create a triplet in normal mode

1. Select a note or rest that specifies the full duration of the desired triplet group. In the case of an eighth note triplet, you will need to select a quarter note or rest—as in the example below:

   

2. Press the keyboard shortcut for a triplet, Ctrl+3 (Mac: Cmd+3); alternatively use the menu, Add→Tuplets→Triplet. This will give the following result:

   

3. The program automatically changes to note-input mode and selects the most appropriate duration—in this example an eighth note. Now enter the desired series of notes/rests. For example:

   

Alternatively, use the Duration Editor to switch between tuplet and non-tuplet.

Create a triplet in note input mode

1. Ensure you are in note input mode (press N).
2. Navigate to the note/rest (or blank measure) where you want the triplet to start (use the left/right arrow keys as required).
3. Select a final duration for the whole triplet group. In the case of an eighth note triplet, click on the quarter note in the note input toolbar (or press 5 on the keyboard).
4. Press the keyboard shortcut for a tuplet, Ctrl+3 (Mac: Cmd+3); alternatively, use the menu, Add→Tuplets→Triplet. This creates a triplet number/bracket and appropriately divides the original note/rest (see image above).
5. The program automatically selects the most appropriate duration—in this example an eighth note—allowing you to immediately start entering the desired series of notes/rests.

Create other tuplets

To create other tuplets substitute one of the following commands at the relevant step above:

• Press Ctrl+2–9 (Mac: Cmd+2–9). 2 for a duplet, 3 for a triplet etc.
• From the menu, select Add→Tuplets, then click on the desired option.

For more complex cases, see below.

Custom tuplets

To create other tuplets than the default options (e.g. 13 sixteenth notes in the space of one quarter note):

1. In Note input mode, select a note duration equaling the total duration of the tuplet; or, if in Normal mode, select a note or rest of the desired overall duration;
2. Open the Create Tuplet dialog from the menu: Add→Tuplets→Other...;

3. Select the desired number ratio (e.g. 13/4 for thirteen sixteenth notes in the space of a quarter note) under "Relation" in the "Type" section. Specify "Number" and "Bracket" using the radio buttons in the "Format" section;

   

4. Click OK to close the dialog:

   

5. Enter the desired series of notes/rests.

Triplet examples

Delete a tuplet

Use either of the following:

• Select the number or bracket and press Del.
• Select any element of the tuplet, then in the Note section of the Inspector press the "Tuplet" button (bottom right), and press Del.
• Select the entire tuplet, using the shift + click method, then press Del.
• Use the Duration Editor to switch between tuplet and non-tuplet.

Change display of tuplets

Using the Inspector

To change the display properties of tuplets in the score, select the tuplet numbers/brackets, and adjust the desired properties in the "Tuplet" section of the Inspector:

• Direction: 'Auto' places the bracket/number in the default position. 'Up' always places the bracket above the note heads; 'Down' always places the bracket below the note heads.
• Number type: Choice of 'Number', 'Ratio', or 'Nothing'.
• Bracket type: 'Automatic' hides the bracket for beamed notes and shows the bracket if the tuplet includes unbeamed notes or rests. 'Bracket' displays the bracket. 'None' hides the bracket.

Using the Tuplets Style dialog

To make fine adjustments to the way that all tuplets in the score are displayed: from the menu, select Format → Style...→Tuplets.

The legend below illustrates some of the properties that can be adjusted in the Tuplets style dialog:

(2) Vertical distance from stem.
(3) Vertical distance from note head.
(5) Distance before stem of first note.
(6) Distance after stem of last note.

External links

• How to create triplets and other tuplets (MuseScore HowTo)
• How to create nonstandard tuplets (MuseScore HowTo)
• How To create triplets and other tuplets across measures (MuseScore HowTo)
• Tuplet at Wikipedia
• The User Guide to Tuplets in MuseScore [video]

Voltas

Volta brackets, or first and second ending brackets, are lines used to mark different endings for a simple repeat. Score playback automatically follows the repeat indications.

To add a volta to the score

Use one of the following methods:

• Select a measure, or range of measures and click a Volta icon in the Lines palette (double-click in versions prior to 3.4).
• Drag-and-drop a volta from the Lines palette, then adjust the length as required (see below).

To change the number of measures that a volta covers

1. Go into Edit mode on the volta. The end handle is automatically selected.
2. Press Shift+→ to move the end handle forward one measure. Press Shift+← to move the handle backward one measure. Repeat as required.

Note: When you select a start or end handle, a dashed line appears connecting it to an anchor point on the staff (see diagram, below). This anchor shows the position of the playback start/end points of the Volta. The Shift commands change the anchor point so playback always remains in sync with the visual start/end points. To make fine adjustments to the visual start or end points, without affecting playback, use other keyboard arrow commands, or drag the handles with a mouse.

Volta properties

To make changes to Volta text:

• Select the volta, and edit the properties in the Text Line Core section of the Inspector.

  

To specify the order of repeats:

• Select the volta, and in "Repeat list" (Volta section of the Inspector) type in a number, or sequence of numbers separated by commas, to indicate the repeat(s) in which the volta is to be played.
  

For example, a first ending shows the number "1"; a second ending, the number "2" and so on. More complex repeats are also possible: e.g. a "Repeat list" displaying "1, 2, 4, 5, 7" indicates that the volta is to be played during repeats 1, 2, 4, 5, and 7, and so on.

Note: Each volta section, except the final one, should end with an end repeat barline.

Note: Keep in mind that the repeat is always referenced in comparison to it's starting point (either the most recent start repeat barline or the start of the current section).

Playback

Sometimes a repeat plays more than two times. If you want to change the number of times MuseScore plays a repeat, go to the measure containing the end repeat barline and change its "Play count". See Measure operations: Other properties and the note on playback for voltas in Repeats and jumps.

Play count

The play count of the measure with the end repeat barline must be set one higher than the number of times you want the measure to play (this is usually equal to the number of entries in that volta repeat list + 1).

Take the following score:

Measure 4 should have play count set to 4
Measure 6 should have play count set to 3

External links

• MuseScore in Minutes, Lesson 8: Repeats and Endings, Part 1 (Video tutorial for MuseScore 2)
• How to create ties leading into a 2nd ending (MuseScore HowTo)

Transposition

Transposition is the act of raising or lowering the pitch of a selection of notes by the same interval. You can choose to transpose notes either manually or by using the Transpose dialog.

Manual transposition

1. Select the notes that you wish to transpose;
2. Use any of the following options:
   • To transpose chromatically (i.e. one semitone at a time): Press ↑ or ↓. Repeat as required.
   • To transpose diatonically (i.e. one scale degree at a time): Press Alt+Shift+↑ or ↓. Repeat as required.
   • To transpose by an octave: Press Ctrl+↑ or ↓ (Mac: Cmd+↑ or ↓).

Automatic transposition

MuseScore's Transpose dialog gives you more options for transposing notes.

Note: By default this dialog opens from the Tools menu, but you can also choose to open it using a keyboard shortcut (see Preferences).

Transpose Chromatically

To Key

To transpose notes up or down to the desired key:

1. Select the notes you want to transpose; no selection equals "select all.".
2. From the menu bar, choose Tools → Transpose….
3. Tick "Transpose Chromatically" and "To key".
4. Tick/untick "Transpose key signature" and "Transpose chord symbols" if required
5. Tick one of "Closest", "Up" or "Down" and select a destination key signature from the drop-down menu.
6. Click OK.

By Interval

To transpose selected notes up or down in semitone increments:

1. Select the notes you want to transpose; no selection equals "select all".
2. From the menu bar, choose Tools → Transpose….
3. Tick "Transpose Chromatically" and "By Interval".
4. Tick/untick "Transpose key signature" and "Transpose chord symbols" if required.
5. Tick "Up" or "Down"; and select a transposition interval from the drop-down menu.
6. Click OK.

Transpose Diatonically

To transpose selected notes up or down by a diatonic interval:

1. Select the notes you want to transpose; no selection equals "select all".
2. From the menu bar, choose Tools → Transpose….
3. Tick "Transpose Diatonically".
4. Tick/untick "Keep degree alteration" and "Transpose chord symbols" if required.
5. Tick "Up" or "Down;" and select a transposition interval from the drop-down menu.
6. Click OK.

Options

Two options are available for both Chromatic and Diatonic transposition mode in the options area:

• Transpose chord symbols, if required.
• And the choice of Use Double ♯ and ♭ or Single ♯ and ♭ Only

Transposing instruments

Transposing instruments, such as the B-flat trumpet or E-flat alto sax, sound lower, or higher than their written pitch. MuseScore has a number of features to facilitate the scoring of these instruments.

Concert pitch

MuseScore's default viewing mode shows the musical notation in written pitch, but you can choose to display the score in concert pitch instead. In the latter mode, the musical notation of all instruments matches the actual pitches that you hear on playback.

• To change the view to concert pitch: Press the Concert Pitch button to highlight it.

You should ensure that the Concert pitch button is OFF before printing the main score or any parts.

Change staff transposition

Instrument transpositions are already set up in MuseScore. However, if you want a rare instrument or transposition that is not available in MuseScore, you may need to edit the instrument transposition manually.

1. Right-click an empty part of the instrument staff and select Staff/Part Properties….
2. At the bottom of the window, select the interval of transposition, any octave shifts, and whether the interval is "Up" (sounds higher than written) or "Down" (sounds lower than written).

You can also use the Change Instrument… button in the Staff/Part Properties window to automatically change the transposition to that of a different standard instrument.

External links

• How to transpose (MuseScore How-To)
• Concert pitch or not? (forum discussion)
• How to change enharmonic key signatures for transposing instruments (MuseScore How-To)

Drum notation

The free MuseScore Drumline (MDL) extension offers even more options to write for drumset, to install it see Language, translations, and extensions.

Entering percussion notation is somewhat different to entering notation for pitched instruments (such as the piano or violin).

Percussion staff types

When you create a percussion staff using the New Score Wizard or the Instruments dialog, MuseScore automatically chooses the most appropriate staff type (1-, 3-, or 5-line) for the instrument: this can be changed, if required, using the "Staff type" column on the Choose instruments / Instruments page. Any additional changes (e.g. to a 2-line staff) can be made from the score itself (see Advanced Style Properties).

On a 5-line percussion staff, each instrument is assigned a vertical staff position (line or space) and a notehead shape. For a drumset, one or two voices can be used. If the latter, voice 1 (the upper voice) usually contains (up-stem) notes played by the hands while voice 2 (the lower voice) usually contains (down-stem) notes played by the feet (see image below).

Note input methods

You can add notes to a percussion staff from any of the following:

• External MIDI keyboard;
• Piano keyboard (virtual);
• Computer keyboard;
• Mouse.

These methods can be used in any desired combination:

MIDI keyboard

To add notes to a percussion staff from a MIDI keyboard:

1. Ensure that the MIDI keyboard is connected and functioning correctly.

   Note: If you click on the percussion staff without entering note input mode, you can demo the percussion instruments from the MIDI keyboard.

2. Click on the note or rest where you want to start.

3. Enter note input mode.
4. Select the correct voice. For example, snares, sidesticks and all cymbals are normally added to voice 1; bass drum to voice 2.
5. Set note duration.
6. Press an instrument key to add a note to the score. To add another note at the same position, keep the first key held down while pressing the second key.

Note: Refer to a GM2 drum map for details about which MIDI keyboard key corresponds to which percussion instrument. Some keyboards (e.g., Casio) display percussion symbols next to the keys as an aid to the user.

Piano keyboard

To add notes to a percussion staff from the virtual Piano Keyboard:

1. Ensure that the Piano keyboard is displayed. Press P (or select it from the menu, View → Piano Keyboard).

   Note: If you click on the percussion staff without entering note input mode, you can demo the percussion instruments from the Piano keyboard.

2. Click on the note or rest where you want to start.

3. Enter note input mode.
4. Select the correct voice. For example, snares, sidesticks and all cymbals are normally added to voice 1; bass drum to voice 2.
5. Set note duration.
6. Click on a (virtual piano) key to add a note to the score.
7. To add another note to an existing one, press Shift and hold it while pressing the new note (in versions before 2.1, use Ctrl (Mac: Cmd)).

Note: Refer to a GM2 drum map for details about which piano key corresponds to which percussion instrument.

By default, the piano keyboard is docked at the bottom of the screen—to the left of the Drum input palette. However you can undock it by dragging, then dock the panel in several ways:

• Drag the panel downwards to the center and it will overlay the Drum input palette, full length. Both panels can then be accessed by Tabs.
• Drag the panel downwards to the right/left and it will dock to the right/left of the Drum input palette.

Computer keyboard

To enter notes on a percussion staff using your computer keyboard:

1. Click on the note or rest where you want to start.
2. Enter note input mode. The Drum input palette now appears at the bottom of the screen (see below).
3. Select the desired note duration.
4. Press the shortcut key (A–G) for the instrument that you wish to enter—refer to the Drum input palette window.
5. If you wish to add another note to an existing one in that voice, press Shift+[A–G].

Note: Voice allocation is determined by the color of the note in the drum input palette: blue for voice 1, green for voice 2.

Mouse

To add a note to a percussion staff

Use the following method to add a new note or to replace an existing chord.

1. Select the note or rest where you want to start. You can also select a measure.
2. Press N to enter note input mode. The Drum input palette now appears at the bottom of the screen (see below).
3. Set note duration.
4. Choose one of the following options:
   • Double-click a note in the Drum input palette.
   • Select a note (e.g. Bass drum, or Snare) in the Drum input palette, then click a note or rest in the score.

To add a note to an existing chord in the percussion staff

1. Ensure you are in note input mode.
2. Select a note duration equal to the note you are adding to.
3. Click on the new note in the Drum input palette.
4. Click above or below the existing note in the percussion staff.

Note: Voice allocation is determined by the color of the note in the drum input palette: blue for voice 1, green for voice 2.

Drum input palette

When a percussion staff is selected and note input mode is ON, a window opens at the bottom of the screen called the Drum input palette. This window is essential for mouse input, and displays shortcuts for computer keyboard input, but can be ignored if using a MIDI keyboard or the virtual Piano Keyboard.

Each note in the palette represents a percussion instrument: hovering the mouse pointer over the note displays the instrument name.

The letters A–G (shown above certain notes in the palette) are designated as shortcuts for entering particular instruments (bass drum, snare, closed hi-hat etc.), rather than referring to note pitches. They can be changed or reallocated as desired in the Edit Drumset window.

When the Drum input palette is open, double-clicking a note in the palette or entering a shortcut letter will add that instrument note to the percussion staff. The color of the note in the palette shows the voice allocated for that note—blue for voice 1, green for voice 2. This can be changed in the Edit Drumset dialog if required.

This voice allocation applies only to keyboard and mouse entry of notes: entry via a MIDI keyboard or the virtual Piano keyboard allows any voice to be used.

Edit Drumset

To open the Edit Drumset window, use one of the following options:

• Click on the Edit Drumset button at the left of the Drum input palette.
• Right-click on a percussion staff and select "Edit Drumset...".

The Edit Drumset dialog displays the percussion instruments available and the MIDI notes/numbers to which they are allocated. It also determines how each instrument is displayed on the staff— its name, position, notehead type and note-stem direction. Any changes made here are automatically saved in the parent MuseScore file.

Clicking on a row in the left-hand column allows you to edit the display properties for that note as follows:

Name: The name you want displayed in the Drum input palette when you mouse over the note. Leave empty to remove this note from the Drum input palette.
Notehead group: Choose a notehead for that instrument from a drop-down list of options (Note: choosing "Custom" activates "Edit noteheads" (below).
Edit Noteheads: Allows you to customize the display further by specifying the noteheads for particular note durations.
Default voice: Assign to one of four voices. This does not affect input from a MIDI keyboard or the virtual Piano keyboard.
Staff line: This number indicates the staff line/space on which the note is displayed. "0" means that the note is displayed on the top line of the 5-line staff. Negative numbers move the note upwards step by step, while positive numbers move it downwards in the same way.
Shortcut: Assign a keyboard shortcut to enter that note.
Stem Direction: Auto, Up or down.

The customized drumset can be saved as a .drm file by pressing Save As.... You can also import a customized drumset using the Load... button.

Sticking

To enter sticking symbols (R, L):

1. Select a start note;
2. From the menu, select Add→Text→Sticking. Alternatively, set up a keyboard shortcut to do the same thing in Preferences;
3. Input the symbol just as you would normal text. To move forward or backwards to the next note, use the same keyboard shortcuts as for chord symbols.
4. To exit, press Esc, or click on a blank section of the score.

Add drum roll

To create a drum roll, use a Tremolo.

External links

• How to create jazz drum notation [MuseScore How-To]
• Video tutorial: MuseScore in Minutes: Lesson 7 - Tablature and Drum Notation
• Drum Parts [video]
• Editing the Drum Palette in MuseScore 1.1 [video]
• Saving Drumset Changes in MuseScore 1.1 [video]
• Guide to Drum and Percussion Notation

Tablature

Music for fretted, stringed instruments is commonly notated using tablature, also known as tab, which provides a visual representation of the strings and fret numbers:

Tablature can also be combined with traditional staff notation:

Create a new tablature staff

If you wish to create tablature as part of a new score, use the New Score Wizard. If you want to add tablature to an existing score, use the Instruments dialog. Or, alternatively, you can convert an existing standard staff. See below for details.

With the New Score wizard

To create tablature in a new score (for combined staff/tablature systems see → below):

1. Open the New Score wizard.
2. Enter the score details (optional). Click Next.
3. On the Choose template file page, click on Choose Instruments under "General".
4. On the Instruments page, select the desired tablature in the "Strings – plucked" category, in the left-hand column. Then click Add.
5. Complete the rest of the New Score Wizard.

Note: If the desired tablature is not available in the Choose Instrument list, add a tablature staff anyway at step 4 (above). Then edit the tablature to your exact requirements using the Staff/Part properties dialog.

With the Instruments dialog

To add a single tablature staff to an existing score (for combined staff/tab system see below):

1. Open the instruments dialog (press I; or from the menu bar, select Edit → Instruments…).
2. Click on the staff to which you want to add another (linked or not).
3. Add the tab staff as described in Add instruments ("Create a new score").

By changing staff type

To convert an existing standard staff to tablature, or tablature to a standard staff:

1. Right-click into an empty spot of the staff and select Staff/Part Properties…. If "Instrument" is already set to a plucked-strings type, then go to step 3.
2. If "Instrument" is not a plucked-strings type, click on Change instrument and select an appropriate instrument from "Strings – Plucked."
3. Click on Advanced Style properties, select the appropriate tablature option from "Template", then press < Reset to Template. You can fine tune the display if necessary using the "Fret Marks" and "Note Values" tabs.
4. Click OK twice to exit.

Edit string data

Change tuning

Note: If you only want to view (rather than change) the instrument tuning, follow steps 1 and 2 only.

1. Right-click on the staff and select Staff/Part Properties….

   

2. Press the Edit String Data… button at the bottom of the dialog box. The String Data dialog opens:

   

3. Click on a string pitch and select Edit String…. Or, alternatively, just double-click the string pitch.

4. Select a new pitch in the Note Selection box and click OK. Or, alternatively, just double-click the new pitch.
5. Click OK to close the "String Data" dialog box. Then click OK to close the "Staff/Part Properties" dialog.

Notes: (1) If tuning is changed when the tablature for that instrument already contains some notes, fret marks will be adjusted automatically (if possible); (2) Any change of tuning to a particular instrument applies only to the score at hand, and does not change any program default settings.

Add a string

1. Right-click on the staff, select Staff/Part Properties…, then press Edit String Data.
2. Click on a string pitch and select New String....
3. Select the new pitch and press OK—or, alternatively, just double-click the new pitch. The new string is inserted below the selected string.

Note: After adding a tablature string you will need to adjust the number of lines in the Staff/Part properties dialog.

Delete a string

1. Right-click on the staff, select Staff/Part Properties…, then press Edit String Data.
2. Click on a string pitch and select Delete String.

Note: After deleting a tablature string you will need to adjust the number of lines in the Staff/Part properties dialog.

Mark unfretted string "open"

This feature is used to mark a (bass) course as unstopped (i.e. like a harp string, only played in the open position): as on a Baroque lute or Theorbo etc. This means that only "0" (zero) or "a" is accepted as a fret mark: any other fret mark will be converted to 0/a.

1. Right-click on the staff, select Staff/Part Properties…, then press Edit String Data.
2. Check one or more boxes in the "Open" column.

Change number of instrument frets

This property defines the maximum fret number which can be entered on a tablature staff.

1. Right-click on the staff, select Staff/Part Properties…, then press Edit String Data.
2. Select or enter a new number in the "Number of frets" spin box.

Change tablature display

From Staff / Part Properties

To access the full range of tablature display options, use the Staff / Parts Properties dialog:

1. Right-click on the staff and select Staff/Part Properties….
2. Click on the Advanced Style Properties… button.

From the Instruments dialog

Some basic tablature display options are available from the Instruments dialogue:

1. Press the keyboard shortcut I; or from the menu bar, select Edit → Instruments….
2. Select a tablature type from the drop-down list under "Staff Type" in the right-hand pane:
   • Simple: Displays fretmarks only. Best for staff/tablature systems.
   • Common: Displays fretmarks, note stems and beams.
   • Full: Displays fretmarks, enhanced note stems, beams, and rests.
   • Italian/French: Historical tablature options for the lute.

The same options are available from the Choose Instruments page of the New Score Wizard.

Combine pitched staff with tablature

Plucked-string instruments—such as the guitar—are commonly notated using both a music staff and tablature (TAB) together. MuseScore gives you the option of having the two staves either unlinked or linked:

1. Unlinked Staves: The advantage of using this option is that each staff can be edited independently. To transfer music notation from one staff to the other, select the desired range and copy and paste it onto the other staff.

2. Linked Staves: The staves are "mutually updating": i.e. any change you make to the notation in one staff is immediately applied to the other staff as well.

A note on fret mark conflicts: When the same note is entered in two different voices, MuseScore tries to ensure that the fret marks do not overlap on the same string. Any overlaps which do occur are marked with red squares: these appear only in the document window and not on any printed copy. In almost all cases (e.g. frets 0 to 4 on the 6th string), overlapping is the desired result and no further adjustment is required. You can hide the red marks by selecting "View" and unticking "Show Unprintable."

Create a new staff/tablature pair with the New Score Wizard

1. Open the New Score wizard.
2. Enter the score details (optional). Click Next.
3. On the Choose template file page, click on Choose Instruments under "General".
4. Select a music staff (not tab) in the "Strings – Plucked" section of the left-hand column. Then click Add.
5. In the right-hand column, click on the newly-created line, labelled "Staff 1". This reveals the "Add Staff/Linked Staff" options in the centre column:
   • Click Add Staff to create an unlinked staff/tab pair.
   • Click Add Linked Staff to create a linked staff/tab pair.
6. In the Staff type column, click on the dropdown list for the newly-created staff and select a tablature option (this can be modified later, if required, on the score page—see Staff/Part Properties).
7. Change the staff order using the ↑ button if needed.
8. Complete the rest of the New Score Wizard, or click Finish.

Note: To create unlinked staves with separate mixer channels, instead of step "5" (above), select a Tablature staff in the left-hand column and click Add. Then continue with steps 6 and 7.

Create a new staff/tablature pair in an existing score

1. Open the Instruments editor (press I, or from the menu bar, select Edit → Instruments…).
2. Then follow steps 4–8 above.

Create a staff/tablature pair from an existing staff

To add tablature to a plucked-string staff in the score (or vice versa):

1. Open the Instruments editor (press I, or from the menu bar, select Edit → Instruments…).
2. In the right-hand column, select the staff you want to create the staff/tab pair from, then follow one of the options shown in step 5 above.
3. Continue with steps 6–8 above.

Enter notes in tablature

Using a computer keyboard

1. In Normal mode, select the measure or existing note from which you want to begin note entry.
2. Switch to note input mode (N): a short 'blue rectangle' appears around one tablature string: this is the current string.
3. Select the duration of the note or rest that you wish to enter (see below).
4. Press the up/down arrow keys to move the cursor to the desired string. Use the left/right arrow keys to navigate through the score.

5. Press 0 to 9 to enter a fret mark from 0 to 9 on the current string; to enter numbers with several digits press each digit in sequence. Keys A to H and K can also be used: convenient when working in French tablature. For L , M, N, use the alphanumeric keyboard and type respectively 10, 11, 12... (Note: You cannot enter a number higher than the "Number of frets" value set in the Edit String Data dialog).

   Press ; (semicolon) to enter a rest of the selected duration.

6. You can enter notes in different voices if required—just as you would in a standard staff.

See also, Edit notes (below).

Historical tablature

Period notation for bass strings (lutes and sim.) is supported:

• French tablature: letters with prefixed slash-like strokes right under the tab body: i.e. 7th string: "a", 8th string: "/a", 9th string: "//a" and so on, all in the first position below the tab body.

• Italian tablature: numbers with 'ledger line'- like segment of string above the tab body: i.e. 7th string: "0" one position above the tab body with one 'ledger line'; 8th string: "0" two positions above the tab body with two 'ledger lines' and so on.

Input of fretmarks is via computer keyboard only: by moving the note entry cursor below (French) or above (Italian) the tab body, 'shadow' slashes or ledger lines will indicate the target string to which the fret mark will be applied; pressing one of the fret keys, will enter (and lay out) the note on that string.

Using a mouse

To enter notes into tablature with a mouse:

• Enter note input mode and select the note or rest duration (see below).
• Click on a string to create a note there. Notes are initially created on fret 0 (or a for French tablatures): to correct, type in the right number from the keyboard.
• You can also increase/decrease the fret mark using Alt+Shift+↑ or Alt+Shift+↓.
• You can enter notes in different voices if required—just as you would in a standard staff.

See also, Edit notes (below).

Select note duration

In note input mode, you can use any of the following methods to set note duration in tablature:

• Press Shift+1 to Shift+9: Sets duration from a 128th to a longa (availability of these shortcuts may depend on the platform and/or keyboard layout);
• Press NumPad1 to NumPad9: Sets duration from a 128th to a longa (if a numeric keypad exists and NumLock is on);
• Click on a note duration icon in the Note Input toolbar above the document window;
• Press Q to decrease the selected duration and W to increase it.

Edit notes

Change fret number

In Note input mode:

• Position the cursor above the fret mark and retype the desired number.
• Increment or decrement the fret mark using Alt+Shift+↑ or Alt+Shift+↓ (The fret mark automatically changes strings, if necessary, to achieve the lowest possible fret position).

In Normal mode:

1. Select one or more fret marks.
2. Use any of the following commands:
   • To increment or decrement, without changing the string: Press ↑/↓.
   • To increment or decrement, changing strings, when possible, to minimize the fret number: Press Alt+Shift+↑/↓

Note: The fret mark cannot be higher than the "Number of frets" value set in the Edit String Data dialog.

Change string number

To move the fret mark to an adjacent string without changing the pitch (if the string is free and can produce that note):

In Note input mode:

• Position the cursor over a fret mark, and press Ctrl+↑/↓ (Mac: Cmd+↑/↓).

In Normal mode:

• Select one or more fret marks, and press Ctrl+↑/↓ (Mac: Cmd+↑/↓).
• Drag a fret mark up or down to an adjacent string.

Crosshead notes

To change a fret mark to a crosshead note:

1. Select one or more fret marks (in non-note-input mode).
2. Press Shift+X to toggles ghost noteheads on/off.

Summary of keyboard commands

Note input mode

Type:	to get:
↑	Select above string as current.
↓	Select below string as current.
Shift+1 to Shift+9	Select a duration (128th to a longa)
NumPad1 to NumPad9	Select a duration (128th to a longa)
Q	Decrease current input duration.
W	Increase current input duration.
0 to 9	Enter a fret digit / letter.
A to H, K	Enter a fret letter / digit.
Alt+Shift+↑	Increase current fret mark.
Alt+Shift+↓	Decrease current fret mark.
; (semicolon)	Enter a rest

Normal mode

Type:	to get:
0	Change note to rest
1 to 9	Change duration of selected note or rest (128th to longa)
Alt+Shift+↑	Increase the pitch of the selected note (MuseScore chooses the string).
↑	Increase the pitch without changing string.
Alt+Shift+↓	Decrease the pitch of the selected note (MuseScore chooses the string).
↓	Decrease the pitch without changing string.
Ctrl+↑ (Mac: Cmd+↑)	Move note to above string, keeping the pitch.
Ctrl+↓ (Mac: Cmd+↓)	Move note to below string, keeping the pitch.
Shift+X	Toggle the ghost notehead on/off.

External links

• Video tutorial: MuseScore in Minutes: Lesson 7 - Tablature and Drum Notation